2) When you press the test button, the ice cube container is filled with water from the water supply tap.
Check the amount of water (see the illustration below). If the water level is too low,
the ice cubes will be small.
This is not a problem with the ice maker CHECK THE WATER
but of the water pressure inLEVEL
the pipe, and occurs frequently. When this problem occurs, contact the dealer service center to check the amount of water supplied.
34
1) Lift up (①) and pull out (➁) the ice maker bucket in the freezer.
INSTALLING THE WATER DISPENSER LINE
Remove any residual matter inside the water supply line
1) Turn on the main water supply &
2) Run water through the dispenser until the water runs clear ICE (6~7 minutes). This will clean the water supply system and
clear air from the lines.
3)Additional flushing may be required in some households.
4)Open the refrigerator door and check if water leaks around the water filter.
WATER
• A
Check the amount of water supplied to the ice tray.
ICE MAKER
TEST BUTTON
TOO HIGH
OPTIMUM-
LEVEL
TOO LOW