Completing the SET UP, Seconds, Setting up14

Refrigerator

Only connect the water line to a drinkable water source.

If you have to repair or disassemble the water line,

get a snug, leak-free connection.

You can test the water line quickly using a

paper cup.Under normal conditions, the water

Compression Nut (1/4”)

(Assembled)

Ferrule (Not supplied)

Plastic Tubing (Assembled)

Compression Fitting (Assembled)

Molded end(Bulb)

Compression nut (B) (1/4”) (Not supplied)

10 seconds.

COMPLETING THE SET UP

Now that you have your new refrigerator installed in place, you are ready to set up and enjoy the features and functions of the appliance.

By completing the following steps, your refrigerator should be fully operational.

Copper tubing or	Plastic tubing (B)
(Not supplied)	(Not supplied)

Household water supply line

1.Connect the household water line to the assembled compression ﬁtting.

-If you are using copper tubing, slip the compression nut ( B ) (not supplied) and ferrule (not supplied) on the copper tubing (not supplied) as shown.

-If you are using plastic tubing ( B ) , insert the molded end (Bulb) of the plastic tubing ( B ) into the compression ﬁtting.

Do not use without the molded end (Bulb) CAUTION of the plastic tubing ( B ).

2.Tighten the compression nut ( B ) onto the compression ﬁtting.

Do not over-tighten the compression nut ( B ) .

3.Turn water on and check for any leakage. If you ﬁnd water drops or leakage in the connection

the connections and, if necessary, tighten.

4.Flush 1 gallon of water through the ﬁlter before drinking or using the water from the refrigerator. (Flush approximately 6 minutes.) To ﬂush, press a large glass or cup against the water dispenser lever. Fill the glass, empty it into the kitchen sink after it is ﬁlled, and then repeat.

5.After you turn on the refrigerator, let the ice maker make ice for 1 to 2 days. Over that period of time, throw out the ﬁrst 1 or 2 buckets of ice the freezer makes to ensure all impurities have been removed from the water line.

setting up_14

1.Make sure your refrigerator is in an appropriate location with reasonable clearance between it and the wall. Refer to installation instructions in this manual.

2.Once the refrigerator is plugged in, make sure the interior light comes on when you open the doors.

3.Set the Temperature control to the coldest temperature and wait for an hour. The freezer will get slightly chilled and the motor will run smoothly. Reset the refrigerator and freezer to the temperatures you want.

4.After you plug the refrigerator in, it will take a few hours to reach the appropriate temperature. You can store food and drinks in the refrigerator after the temperature is sufﬁciently cool.

In the event of a power failure, call the local ofﬁ ce of your Electricity Company and ask how long it is

going to last.

-Most power failures that are corrected in an hour or two will not affect your refrigerator temperatures. However, you should minimize the number of door openings while the power is off.

-But Should the power failure last more than 24hours, remove all frozen food.

If the key is provided with refrigerator, the keys should be kept out of the reach of children and not be in the vicinity of the appliance.

The appliance might not operate consistently (possibility of defrosting of co tents or temperature becoming too warm in the frozen food compartment) when sited for an extended period of time below the cold end of the range of temperatures for which the refrigerating appliance is designed.

DA68-02601A(EN+FR+ES)-0.2.indb 11

2012.3.31 9:49:44 AM

RF263BEAESR, RF263BEAEBC, RF263BEAEWW specifications

The Samsung RF263BEAEWW, RF263BEAEBC, and RF263BEAESR are a lineup of high-performing refrigerators designed to meet the demands of modern households. Featuring innovative technology and an array of useful characteristics, these refrigerators stand out for their efficiency, design, and features.

One of the main features of these models is the Twin Cooling Plus technology. This system uses separate cooling systems for the refrigerator and freezer compartments, ensuring that the refrigerator maintains optimal humidity levels while the freezer stays dry. This not only helps preserve food quality and freshness but also minimizes odor transfer between compartments.

The exterior of the RF263 series showcases a sleek and modern design, available in several finishes including fingerprint-resistant stainless steel, which makes cleaning easier and helps maintain its stylish appearance. The LED lighting inside provides bright and energy-efficient illumination, enhancing visibility and allowing users to easily find items stored in the refrigerator.

In terms of storage capacity, these models boast a spacious interior with flexible shelving and adjustable bins. The gallon door storage can accommodate larger items, making it convenient for storing beverages and bigger containers, while the crisper drawers are designed to keep fruits and vegetables fresh for extended periods.

Another significant characteristic is the Ice Maker feature, which provides a constant supply of ice. An external dispenser option also allows for easy access to both ice and water without opening the door, enhancing energy efficiency while simplifying usage.

Energy efficiency is a key highlight of the Samsung RF263BEAE models, with Energy Star certification that reflects their commitment to reducing energy consumption without sacrificing performance. This feature not only helps lower electricity bills but also contributes to a more environmentally friendly household.

Overall, the Samsung RF263BEAEWW, RF263BEAEBC, and RF263BEAESR models exemplify the brand’s commitment to integrating cutting-edge technology, efficient design, and functionality into home appliances. With a focus on food preservation, convenience, and energy efficiency, these refrigerators are ideal for families looking to optimize their kitchen space while enjoying modern conveniences. Whether choosing white or black finishes, users can expect reliable performance and stylish aesthetics.