setting up your side-by-side refrigerator
SETTING UP THE REFRIGERATOR DOORS
If your entrance won’t allow the refrigerator to pass easily through it, you can remove the doors.
Removing the Front Leg Cover
First, open both the freezer and refrigerator doors, and then take off the front leg cover by turning the three screws
Separating the Water Supply Line from the Refrigerator
1.Remove two water lines(gray one is for ice and the other one is for water)by pressing the coupler 1 and pulling the water line 2 away.
1
Make sure the color of the water lines match.
2
Reattaching the Water Supply Line
1.The Water Line must be fully Inserted to the center of transparent coupler to prevent water leakage from the dispenser.
2.Insert the 2 clips in the install pack and check that each clip holds the line fi rmly.
center of transparent coupler
clip A (1/4”) (6.35mm)
Do not cut the water line. Gently separate it from the coupler.
10_ setting up
2013.2.28 10:14:20 AM |