4. Remove the fi lter cap and insert the fi lter |
|
|
|
into the fi lter housing. | 4 | Cover filter | 5 |
5. Slowly turn the water fi lter 90º clockwise |
|
|
|
to align with the printing mark on the |
|
|
|
cover, locking the fi lter in position. Make |
|
|
|
sure to align the water fi lter label mark |
|
|
|
with center of cover fi lter printing as |
|
|
|
illustrated. Remember, do not over- |
|
|
|
tighten. |
| Separation | Align the indication |
|
| of red cap | mark with lock position |
Removing any residual matter inside the water |
|
| |
supply line after installing filter. | Ice | Water | |
1. | Turn ON the main water supply. |
|
|
2. | Press the Water button and push the dispenser pad. |
|
|
3.Run water through the dispenser until the water runs clear (approx.
3L). This will clean the water supply system and remove air from the lines.
4. Additional fl ushing may be required in some households.
5. Open the refrigerator door and make sure there are no water leaks coming from the water fi lter.
A newly installed water fi lter cartridge may cause water to briefl y spurt from the water dispenser. This is due to air getting into the line. It should pose no problem to operation.
setting up _17
01 SETTING UP
2013.2.28 10:14:37 AM |