4. Remove the filter cap and insert the filter |
|
|
|
into the filter housing. | 4 | Cover filter | 5 |
5. Slowly turn the water filter 90º clockwise |
|
|
|
to align with the printing mark on the |
|
|
|
cover, locking the filter in position. Make |
|
|
|
sure to align the water filter label mark |
|
|
|
with center of cover filter printing as |
|
|
|
illustrated. Remember, do not over- |
|
|
|
tighten. |
| Separation | Align the indication |
|
| of red cap | mark with lock position |
Removing any residual matter inside the water |
|
| |
supply line after installing filter. | Ice | Water | |
1. | Turn ON the main water supply. |
|
|
2. | Press the Water button and push the dispenser pad. |
|
|
3.Run water through the dispenser until the water runs clear (approx.
3L). This will clean the water supply system and remove air from the lines.
4. Additional flushing may be required in some households.
5. Open the refrigerator door and make sure there are no water leaks coming from the water filter.
A newly installed water filter cartridge may cause water to briefly spurt from the water dispenser. This is due to air getting into the line. It should pose no problem to operation.
setting up _17
01 SETTING UP
14. 1. 18. |
�� 11:42