Thermador HDDW 36DS Care and Cleaning, Stainless steel surfaces, Aluminium and plastic surfaces

Page 8

CARE AND CLEANING

WARNING. To avoid risk of fire and explosion do not use flammable liquids or solvents. Always unplug or disconnect the appliance from the power supply before servicing.

Do not clean the extractor hood with abrasive sponges or with cleaning agents which contain sand, soda, acid or chlorine!

To facilitate cleaning, pull out the filter drawer.

Do not catch hand between the filter brackets, danger of crushing!

Do not insert the filter drawer while cleaning it. Danger of crushing!

When cleaning the grease filters, remove grease deposits from accessible parts of the housing. This prevents the risk of fire and ensures that the extractor hood continues operating at maximum efficiency.

Note: Do not use alcohol (spirit) on plastic surfaces, as dull marks may appear.

Caution: Ensure that the kitchen is adequately ventilated. Avoid naked flames!

Clean the operating buttons with a mild soapy solution and a soft, damp cloth only.

Do not use stainless-steel cleaner to clean the operating buttons.

Stainless steel surfaces:

Use a mild non-abrasive stainless steel cleaner.

Clean the surface in the same direction as it has been ground and polished.

We recommend our stainless steel cleaner Fantastik® or Formula 409® sprayed onto a paper towel.

Aluminium and plastic surfaces:

Do not use dry cloths.

Use a mild window cleaning agent.

Do not use aggressive, acidic or caustic cleaners.

Observe the warranty regulations in the enclosed service booklet.

Clean the extractor hood with a hot soap solution or a mild window cleaner.

Do not scrape off dried-on dirt but wipe off with a damp cloth.

PAGE 8

Image 8
Contents Ventildowndraftation Table of Contents Important Safety Instructions Cuate and Call the Fire DepartmentSafety Instructions Features EXHAUST-AIR ModeOperation Filters and Maintenance Saturation indicator ~Cleaning the metal grease filters Removing and inserting the metal grease filtersAluminium and plastic surfaces Care and CleaningStainless steel surfaces Replacing the Bulbs Troubleshooting Guide Customer ServicesProblem Possible Cause Remedy Before Calling for ServiceWhat is Covered What is not CoveredWarranty Application Service Data