Philips MCI300/05 Press or , then to select Apply settings? Yes, On the item, press Menu

Use an Ethernet cable (sold separately) to connect the MCi300 to the router that is connected to your home network with broadband Internet access.

Press or , then to select (Apply settings?) [Yes].

» The MCi300 displays a confirmation screen that the settings are saved.

9 Press the alphanumeric buttons to enter the static IP address, then press .

10 Press or , then to select (Apply settings?) [Yes].

»The MCi300 displays a confirmation screen that the settings are saved.

Create wired connection with automatic IP address

This chapter shows you how to create a wired connection to a home network with automatic IP address.

1 Use an Ethernet cable (sold separately) to connect the MCi300 to the router that is connected to your home network with broadband Internet access.

2 Ensure that the MCi300 is turned on.

•First-time setup when you connect the MCi300 to the power supply

(continue with step 5).

•Change network settings after first- time setup (continue with step 3-5).

3 On the MCi300, press MENU.

4 Press or , then to select[Settings] > [Network ].

5 Press or , then to select[Wired] > [Automatic] > (Apply settings?) [Yes].

»The MCi300 displays a confirmation screen that the settings are saved.

Create wired connection with static IP address

This chapter shows you how to create a wired connection to a home network with automatic IP address.

1

2	Ensure that the MCi300 is turned on.
	• First-time setup when you connect
	the MCi300 to the power supply
	(continue with step 5-7).
	• Change network settings after first-
3	time setup (continue with step 3-7).
	On the item, press MENU.
4	Press	or	, then	to select[Settings] >
5	[Network ].
	Press	or	, then	to select[Wired] >
6	[Static].
	Press the alphanumeric buttons to enter
7	the static IP address, then press .

12EN