Wait until the language selection menu pops up, to select your language.
Note
•When the MCi300 is in eco standby mode, the remote control is inactive.
First-time installation
When you connect the MCi300 to the power supply for the first time:
1
2 Press or , then to select the language.
»The MCi300 prompts you to select the network settings.
3 To select the network settings, follow the steps on how to Connect to a home network. (see ‘Connect to a home network’ on page 11)
•To stop the network setup, press .
•To return to the Home menu, press HOME.
Tip
•After the
10EN