Philips MCI300/12, MCI300/05 Play CD, Stream music from a UPnP device / PC, Internet radio

Follow the instructions to install the Windows Media Player 11.

On the PC, click Start > Programs > Windows Media Player.

In the Windows Media Player interface, click on the Library pull-down menu and select Media sharing....

5 Play

Play CD

1 Press to open the CD tray.

2 Insert CD with printed side facing up.

3 Press to close the CD tray.

4 Press OK / to play.

Stream music from a UPnP device / PC

You can stream music to the MCi300 from a connected UPnP device such as a PC, if you install the Windows Media Player 11 on the PC and configure the PC to share your music. (If the Windows Media Player 11 is already installed on the PC, you can skip the installation section and continue with the configuration.)

Install Windows Media Player 11

1 On the PC, insert the supplied software CD.

»Installation starts.

»If installation does not start, click on the icon in your Explorer program.

2 Follow the instructions on the PC to install Windows Media Player 11.

Configure a PC to share music

You can share music from a PC with the MCi300.

1

2

3

4	In the Media sharing... pop-up window,
	select Share my media, then confirm with		glish
	OK.
	» When the MCi300 is connected to		En
	your home network, the display shows
5	the MCi300 with an alert icon:
			Play
	Click on the MCi300.
6	Select Allow, then confirm with OK.
7	On the MCi300, press HOME.
8	Press or , then	to select[UPnP].

»It can take a few minutes until the PC is ready to share media.

»The display shows [Searching for UPnP servers...], followed by the list of media servers.

9 Press or , then to select the PC. 10 Press or to select a track, then press

OK / to play (see ‘Play’ on page 13).

Internet radio

Note

•Internet radio features require broadband Internet access.

•Internet radio features require registration.

Register the MCi300 with Philips

1 The following steps show you how to register the Internet radio feature.

2 Ensure that the MCi300 is turned on.

3 Ensure that the MCi300 is connected to the Internet.

4 Ensure you have a valid email address.

5 Press INTERNET RADIO.

»The display shows the Internet radio registration screen.

6 Press alphanumeric buttons on the remote control to enter the valid email address.

EN 13