HP Color Inkjet cp1700 manual Printhead Access

Message Explanation Recommended Action

AUTO-DUPLEX UNIT NOT AVAILABLE PRESS RESUME OR CANCEL

The auto-duplex unit comes with the CP1700D model. You can also purchase it as an optional accessory. If you have not purchased the auto- duplex unit, you cannot print an auto-duplex job.

If you have purchased the auto-duplex unit, make sure it is installed correctly in the printer. Otherwise, press the RESUME button to continue the job using single-sided printing, or press the CANCEL button to cancel the job.

REINSERT [number]

PAGES INTO [TRAY ]

This message is for manual duplexing. Indicates that printing on the first side of the media is complete.

Take the printed stack of paper from the output tray and put it back into the specified tray.

ROTATE AND REINSERT [number] PAGES INTO [TRAY]

This message is for manual duplexing. Indicates that printing on the first side of the media is complete.

Take the printed pages from output tray, rotate the stack 180 degree horizontally and put it back to the specified tray.

PRINTHEAD ACCESS	The printhead access latch is
LATCH OPEN	open.

Open the printhead cover, close the printhead access latch, and then close the printhead cover. You will have to use some force to close the printhead access latch. If the printhead access latch will not close, ensure that the printheads are seated properly by pushing down firmly on each printhead.

REAR ACCESS PANEL	The rear access panel is not	Make sure the rear access
OPEN	installed correctly or at all in	panel is inserted correctly and
	the printer.	completely into the printer.
LANGUAGE=	Displays the language in	For information about
[LANGUAGE]	which the LCD shows	changing the display
	messages.	language, see “Setting the
		LCD language.”

B-4 ENWW