Making copies of the software
The starter CD contains a utility that lets you copy the printer software on to disks. When you run the Installer, select Customization Utility to copy disks.
You can also use this utility to copy the printer software to your hard drive or to a network drive. After the files are copied to another location, you can install the printer software from that location.
Installing the printer driver
It is a good idea to close all programs before you start the installation process. If you do not close all programs, you might be prompted to do so when you run the Setup Wizard.
To install the printer driver
You must have administrator privileges to install a printer driver on a computer running Windows NT 4.0 or Windows 2000.
1Start Windows and make sure no other applications are running.
2Insert the starter CD into your
3If the System Setup Wizard does not run automatically, click Start, click Run, and then in the command line text box, type the letter of your
4Click Install Printer Driver from the CD Browser menu.
5Select the language of the printer software that you want to install, and then click OK.
The software will be installed in the language that you have selected. This means that you can be running an English version of Windows and set the language preference to Spanish, and the installation utility will install the Spanish version of the printing software.
6Click Yes to accept the terms of the license agreement.
7If the printer is set up for local printing, click Connected to this computer, and then click Next. Otherwise, continue with step 9.
a In the Cable Type Selection window, select the type of cable you are using to connect the printer to the computer (USB, Parallel Cable, or Network Cable) and then click Next.
You can connect all three types of cables to your printer. The printer will process jobs in the order in which they are sent.
ENWW |
