HP supports the following network operating systems (NOS):
lWindows 2000
lWindows NT 4.0 (with Service Pack 4 or later)
lNovell Netware 4.11 (Bindery, NDS)
lNovell Netware 5.0 and 5.1 (Bindery, NDS and NDPS)
lWindows Terminal Server Edition 4.0
lWindows 2000 Server with Terminal Services
lWindows Terminal Server Edition 4.0 and Citrix Metaframe 1.8
lWindows 2000 Server with Terminal Services and Citrix Metaframe 1.8
The following operating systems are supported:
lWindows NT 4.0 (with Service Pack 4 or later)
lWindows 2000
lWindows 95
lWindows 98
lWindows Me
Establishing a network connection
Your printer can be shared in a network environment by using an LIO module. The LIO module can be used in a
The LIO module is an optional accessory you can purchase. For information about ordering this part, see “HP Supplies and Accessories.”
For information about installation and setup of LIO modules, refer to the documentation that came with it.
Installing the network printer on client computers
Once you have installed the LIO module and set up your network connection, you need to install the printer software on your client computers.
You can install the software from the starter CD or by adding a printer to the computer and browsing for the .inf file.
ENWW |
