Cleveland Range KGT-12-T, KGT-6-T manual For the User, Retain this Manual for Your Reference

Page 2

FOR THE USER

IMPORTANT!

PRIOR TO REMOVING ANY FITTINGS ENSURE

KETTLE IS AT ROOM TEMPERATURE AND

PRESSURE GAUGE IS SHOWING ZERO OR LESS PRESSURE.

FOR YOUR SAFETY

DO NOT STORE OR USE GASOLINE OR ANY OTHER FLAMMABLE LIQUIDS AND VAPOURS IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE.

WARNING: Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read the installation and operating instructions thoroughly before installing or servicing this equipment.

IMPORTANT

POST IN A PROMINENT LOCATION, INSTRUCTIONS TO BE FOLLOWED IN THE EVENT THE USER SMELLS GAS. THIS INFORMATION SHALL BE OBTAINED BY CONSULTING YOUR LOCAL GAS SUPPLIER.

KEEP APPLIANCE AREA FREE AND CLEAR FROM COMBUSTIBLES.

DO NOT OBSTRUCT THE FLOW OF COMBUSTION AND VENTILATION AIR.

ALL SERVICE MUST BE PERFORMED BY A QUALIFIED CLEVELAND RANGE TECHNICIAN.

RETAIN THIS MANUAL FOR YOUR REFERENCE.

Image 2
Contents Operators Manual For the User Retain this Manual for Your ReferenceInstallation Electrical Installation ChecksCleaning VentilationOperating Instructions Item # Description FunctionOperating the Kettle Approximate Boiling TimesCleaning Instructions Cleaning InstructionsCare and Cleaning Marine LockStainless Steel Equipment Care and Cleaning Warranty Service PartsFaucet Assembly Console Components Used after JuneConsole Components Trunnion Assembly Trunnion AssemblySwitches & Indicators Switches & Indicators Main Components Piping Assembly Piping Assembly Maintenance Inspection and Maintenance Check ListCalibrating Procedure Pressure Relief Valve Periodic Testing ProcedureReservoir Fill Procedures Hands and Body Clear of DischargeKettle Jacket Cleanout and Passivation Procedures Mixing / Filling ProcedureKettle Venting Instructions Vacuum Leak Test ProcedureRepairing Leaks in Steam Jacketed Kettle Fittings Wiring Diagram Item # DescriptionOperating Sequences Solid State Control SequenceMarine Lock Testing Procedure GAS Valve Replacement KIT Item # KE55240-7