Philips MCB146 user manual Manual tune, Local scan and Full scan

Page 15
Manual tune -> Auto scan local -> Auto scan full -> DRC value -> Sw version
3 To select an option, press 2; .
4 Repeat steps 2-3if sub-option is available under one option.
Press 4 / ¢ to scroll the menu options:
2
Selecting a preset DAB station
1 Press PRESET +/- ( 3 / 4 on the remote control ) to select desired preset station.
2 Press 2; to confirm the selection.
Note
– If you have not yet stored a DAB station in one of the presets, "Empty preset" will be displayed.The display will revert to the previously selected station after a few seconds.
Resetting to the factory setting
Resetting to the factory setting will delete all of the preset stations.
1 In standby mode, on the main unit, press and hold MENU and PRESET + simultaneously.
2 Then press 9 to reset.
Changing the DAB station information
On the display of DAB broadcasting, the first line shows a station name, and the second line shows the service information for the current station. 7 types of service information are available.
● Press INFO./RDS repeatedly to cycle through the display information.
Using the MENU control
The menu control lets you access the DAB radio setup options.
1 In DAB mode, press MENU to enter the menu options.
➜The first setup option "Manual tune" is displayed.

DAB Radio

Manual tune

By using this feature, it is possible to manually tune to a specific channel/frequency. In addition to antenna orienting for better radio reception, the optimal reception can also be obtained by using this feature.

1In DAB mode, press MENU to display "Manual tune" option.

2Press 2; to confirm the selection.

➜ Display shows a channel and its frequency.

3Press 4 / ¢ repeatedly until desired channel/frequency appears.

4Press 2; to confirm the selection.

●You may press INFO./RDS to change the service information on the display.

●You may adjust the position of the antenna to obtain the optimal signal strength.

Local scan and Full scan

Local scan is used to perform a small range of DAB radio search (in UK). Full scan is used to perform a wide range of DAB radio search (outside UK).

1In DAB mode, press MENU to enter the menu options.

2Press 4 / ¢ repeatedly until “Auto scan local” or “Auto scan full“ is displayed.

3Press 2; to confirm the selection. ➜The local or full scan starts.

English

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Register your product and get support at Micro Hi-Fi SystemCopyright in the U.K How to connect a plugImportant notes for users in the U.K Mains plugPullto Open Contents Environmental Information Supplied accessoriesSafety Information General InformationSet your volume control at a low setting Hearing SafetyListen at a moderate volume To establish a safe volume levelSpeakers Connection Front Speakers Power Antenna Connection DAB/FM AntennaPreparations Rear connectionsUsing the Remote Control to operate the system Inserting batteries into the Remote ControlControls on the system Controls on remote controlTunes to a radio frequency For clock/timerFor the clock/timer function Selects a preset FM stationBasic Functions Switching the system onAdjusting volume and sound Power-saving automatic standbyCD Operation Loading a discBasic playback controls Erasing the programme Different play modes Shuffle and RepeatProgramming track numbers Reviewing the programmeChanging DAB stations Switching on DAB radioStoring for DAB presets DAB RadioLocal scan and Full scan Manual tuneDynamic Range Control DRC Software version Programming radio stations Tuning to radio stationsTuning to preset radio stations FM RadioTo turn on or off clock synchronizing Switching through RDS informationAutomatic clock setting via RDS Listening to an external sourceActivating and deactivating Clock/TimerSetting the clock Setting the timerCleaning Discs SpecificationsMaintenance Cleaning the CabinetTroubleshooting ProblemSolution Problem Solution Page Meet Philips at the Internet
Top Page Image Contents