Philips MCB146 user manual Troubleshooting, Problem, Solution

Page 21

Troubleshooting

WARNING

Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock.

If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help.

English

Problem

NO CD” is displayed.

Radio reception is poor.

The system does not react when buttons are pressed.

Sound cannot be heard or is of poor quality.

The left and right sound outputs are reversed.

The remote control does not function properly.

Solution

Insert a disc.

Check if the disc is inserted upside down.

Wait until the moisture condensation at the lens has cleared.

Replace or clean the disc, see “Maintenance”.

Use a finalized CD-RW or CD-R.

If the signal is too weak, adjust the antenna. For DAB, you may also perform manual tuning. See DAB- Manual tune.

Increase the distance between the Mini HiFi System and your TV or VCR.

Remove and reconnect the AC power plug and switch on the system again.

Adjust the volume.

Disconnect the headphones.

Check that the speakers are connec ted correctly.

Check if the stripped speaker wire is clamped.

Check the speaker connections and location.

Select the source (CD or TUNER, for example) before pressing the function button (É,í,ë).

Reduce the distance between the remote control and the system.

Insert the batteries with their polarities (+/– signs) aligned as indicated.

Replace the batteries.

Point the remote control directly towards the IR sensor.

21

Image 21
Contents Register your product and get support at Micro Hi-Fi SystemImportant notes for users in the U.K How to connect a plugMains plug Copyright in the U.KPullto Open Contents Safety Information Supplied accessoriesGeneral Information Environmental InformationListen at a moderate volume Hearing SafetyTo establish a safe volume level Set your volume control at a low settingPreparations Power Antenna Connection DAB/FM AntennaRear connections Speakers Connection Front SpeakersUsing the Remote Control to operate the system Inserting batteries into the Remote ControlControls on the system Controls on remote controlFor the clock/timer function For clock/timerSelects a preset FM station Tunes to a radio frequencyAdjusting volume and sound Switching the system onPower-saving automatic standby Basic FunctionsCD Operation Loading a discBasic playback controls Programming track numbers Different play modes Shuffle and RepeatReviewing the programme Erasing the programmeStoring for DAB presets Switching on DAB radioDAB Radio Changing DAB stationsLocal scan and Full scan Manual tuneDynamic Range Control DRC Software version Tuning to preset radio stations Tuning to radio stationsFM Radio Programming radio stationsAutomatic clock setting via RDS Switching through RDS informationListening to an external source To turn on or off clock synchronizingSetting the clock Clock/TimerSetting the timer Activating and deactivatingMaintenance SpecificationsCleaning the Cabinet Cleaning DiscsTroubleshooting ProblemSolution Problem Solution Page Meet Philips at the Internet