Alto-Shaam AS-250 manual Equipment Care, Clean Daily, Clean the Door Vents, Clean the Probes Daily

Page 16

CARE AND CLEANING

EQUIPMENT CARE

Under normal circumstances, this oven should provide you with long and trouble free service. There is no preventative maintenance required, however, the following Equipment

Care Guide will maximize the potential life and trouble free operation of this oven.

The cleanliness and appearance of this equipment will contribute considerably to operating efficiency and savory, appetizing food. Good equipment that is kept clean works better and lasts longer.

CLEAN DAILY

1. Disconnect unit from power source, and let cool.

2. Remove all detachable items such as wire shelves, side racks, and drip pans. Clean these items separately.

3. Wipe the interior metal surfaces of the oven with a paper towel to remove loose food debris.

4.Clean the interior metal surfaces of the cabinet with a damp clean cloth or sponge and any good commercial detergent.

NOTE: Avoid the use of abrasive cleaning compounds, chloride based cleaners, or cleaners containing quaternary salts. Never use hydrochloric acid (muriatic acid) on stainless steel.

5.Spray heavily soiled areas with a water soluble degreaser and let stand for 10 minutes, then remove soil with a plastic scouring pad.

6.Wipe control panel, door vents, door handles, and door gaskets thoroughly since these areas harbor food debris.

7.Rinse surfaces by wiping with sponge and clean warm water.

8.Remove excess water with sponge and wipe dry with a clean cloth or air dry. Leave doors open until interior is completely dry. Replace side racks and shelves.

9.Wipe door gaskets and control panel dry with a clean, soft cloth.

10.Interior can be wiped with a sanitizing solution after cleaning and rinsing. This solution must be approved for use on stainless steel food contact surfaces.

DANGER

DISCONNECT UNIT FROM

POWER SOURCE BEFORE

CLEANING OR SERVICING.

11.To help maintain the protective film coating on polished stainless steel, clean the exterior of the cabinet with a cleaner recommended for stainless steel surfaces. Spray the cleaning agent on a clean cloth and wipe with the grain of the stainless steel.

12.Clean any glass with a window cleaner.

Always follow appropriate state or local health (hygiene) regulations regarding all applicable cleaning and sanitation requirements for equipment.

CLEAN THE DOOR VENTS

Door vents need to be inspected and cleaned as required.

CLEAN THE PROBES DAILY

Remove all food soil from probes. Wipe entire probe and cable

assembly with warm detergent solution and a clean cloth. Remove detergent by wiping each probe and cable with clean rinse

water and a cloth. Wipe probes and probe brackets with disposable alcohol pad or sanitizing solution recommended for food contact surfaces. Allow probe and cable to air dry in probe holding bracket.

CHECK THE COOLING FAN IN THE OVEN CONTROL AREA

While the oven is warm, check that the cooling fan in the oven control area is functioning. The fan is located at the back of the unit, toward the top.

CHECK OVERALL CONDITION OF

OVEN ONCE A MONTH

Check the oven once a month for physical damage and loose screws. Correct any problems before they begin to interfere with the operation of the oven.

D A N G E R

AT NO TIME SHOULD THE INTERIOR

OR EXTERIOR BE STEAM CLEANED,

HOSED DOWN, OR FLOODED WITH

WATER OR LIQUID SOLUTION OF

ANY KIND. DO NOT USE WATER JET

TO CLEAN.

SEVERE DAMAGE OR

ELECTRICAL HAZARD

COULD RESULT.

WARRANTY BECOMES VOID IF

APPLIANCE IS FLOODED

DO NOT USE OVEN IF CONTROLS ARE NOT

PROPERLY FUNCTIONING

Refer to the Trouble Shooting Guide located in this manual or call an authorized service technician.

pg. 14

AS-250installation/operation/service manual

Image 16
Contents Operation Maintenance USAWire Diagrams L I V E R Y P a C K I N GSafety Procedures Precautions N G E RSite Installation Minimum Clearance RequirementsInstallation and START-UP LevelingLEG Installation Instructions Bottom ViewElectrical Connection 230VAudible Signals User Safety InformationStart UP Operation Severe Damage or Electrical Hazard Could ResultControl Features Operating Features & Functions Arrow KeysTo Cook/Hold using Preset Menu Keys Cook/Hold InstructionsProgramming a Preset Erasing a PresetGeneral Holding Guideline Cleaning and Preventive Maintenance Cleaning AgentsCleaning Materials Protecting Stainless Steel SurfacesClean Daily Clean the Door VentsClean the Probes Daily Equipment CareN I T a T I O N Trouble Shooting To test probe and air sensorTrouble Shooting Internal Electrical Components No power. Display will not lightTo test air sensor To test probe sensorAS-250 Exterior Service View Service View Parts List Cable Heating KIT #4878Page Page Limited Warranty
Related manuals
Manual 2 pages 38.48 Kb

AS-250 specifications

The Alto-Shaam AS-250 is a versatile and innovative cooking solution designed for commercial kitchens seeking efficiency, precision, and reliability. This unit has gained a stellar reputation in the foodservice industry due to its array of features and advanced technologies that cater to various cooking needs.

One of the standout features of the Alto-Shaam AS-250 is its unique Halo Heat® technology. This patented system utilizes a combination of gentle, even heating with efficient, patented heat sources to maintain food quality without drying it out. Halo Heat® ensures that food is held at optimal temperatures, preserving moisture and enhancing flavors. This technology is particularly beneficial for holding and serving a variety of dishes, from meats to pastries, all while maintaining the integrity and consistency of the food.

The AS-250 is designed with user-friendly controls that make operation simple and intuitive. Its digital temperature control system allows chefs to set and monitor temperatures precisely, ensuring consistent results every time. This precision is crucial in commercial settings where food safety and quality are paramount.

Another notable aspect of the Alto-Shaam AS-250 is its compact design, catering to kitchens with limited space. The unit’s efficient footprint does not compromise on capacity, allowing for ample cooking space while fitting neatly into tighter environments. It also features a stainless steel construction, which ensures durability and easy cleaning, making it a reliable addition to busy kitchens.

The AS-250 is equipped with adjustable shelving, providing flexibility for various types of food items and plating options. This adaptability allows for an organized workspace, facilitating better workflow in the kitchen environment. Additionally, the unit has a self-contained design, eliminating the need for external exhaust hoods and simplifying installation and maintenance.

Energy efficiency is another critical characteristic of the Alto-Shaam AS-250. Designed to minimize energy consumption while maximizing performance, this unit helps reduce operational costs without sacrificing quality or output.

Overall, the Alto-Shaam AS-250 is an exemplary cooking solution that combines innovative technology with practical design features. Its versatility, reliability, and focus on food quality make it an invaluable asset for any commercial kitchen looking to elevate its cooking processes while ensuring consistency in food service.