2
3 A
1.Remove the lower rack from the machine.
2.Turn the coarse filter counterclockwise to the left and pull it out in an upward direction A.
3.Pull out the main filter B.
4.Press on the two tabs of the coarse filter and remove the micro filter C.
5.Clean the filters thoroughly under running water. Use a brush if necessary.
6.Replace main filter.
7.Replace the micro filter and the coarse filter into the main filter.
8.Twist it clockwise until it clicks into the place.
B |
C |
CAUTION
Do not operate your dishwasher without a filter. You will damage your machine. Ensure that your filters are correctly installed.
10.2.2 CLEANING THE SPRAY ARMS
Notice :
Dirt and/or calcium residue may block the nozzles on the spray arms. For this reason, regularly check the spray nozzles.
1.Lower spray arm
2.Upper spray arm
1.Remove the lower rack from the machine.
2.Pull off the lower spray arm in an upward direction A.
3.Loosen the fastening screw of the upper spray arm and pull off the spray arm B by a downward motion.
4.Clean the spray arms under running water.
5.Replace the lower spray arm in a downward direction.
6.Replace the upper spray arm and tighten the fastening screw by turning it around to the left.
7.Insert the lower rack.
A |
1 |
B |
2 |
CAUTION
Ensure that the fastening screw is tight on upper spray arm.
20