Philips SDV9011K/17, MANT901EN user manual Parts included, Assembly of UHF Portion

Page 3

EN

IMPORTANT

READ

BEFORE

INSTALLATION

Take the time to plan your installation procedure. Do all assembly work on the antenna on the ground. Raise the completed antenna after assembly.

Do NOT work on a wet, snowy or windy day or if a thunderstorm is approaching. Do NOT use a metal ladder.

If the antenna assembly starts to fall, get away from it and let it fall. Remember that the antenna mast and cable are all excellent conduc- tors of electrical current.

Do NOT install the antenna by yourself. Be sure that there are two other people available for help.

If any part of the antenna should come in contact with a power line .

. . DON'T TOUCH IT OR TRY TO REMOVE IT YOURSELF. Call your local power company immediately.They will remove it.

Should an electrical accident occur ... DON'TTOUCHTHE PERSON IN CONTACT WITH THE POWER LINE, or you too can become electrocuted. Instead, use a DRY board, stick, or rope to push or pull the victim away from the power lines and antenna. Once clear, check the victim. If he has stopped breathing, immediately administer car- diopulmonary resuscitation (CPR) and stay with him. Have someone else call for medical help.

Install wire antennas high enough that they will not be "walked into" by people.

Do not install antenna wire(s) over or under utility lines.

Note: For final installation and connection of your antenna, addi- tional hardware may be required. Before starting assembly, please read through the instructions care- fully to determine your specific requirements.

EN

Parts included:

 

a. UHF Boom-A

. 2

b. UHF Boom-B

. 2

c. VHF Boom-A

. 1

d. VHF Boom-B

. 2

e. Reflector Elements

. 2

f.

46˝ Element

. 2

g.

50˝ Element

. 2

h.

Tubing Brace

. 2

j.

Phasing Wire

. 2

k.

Reflector Brackets

. 2

l.

Pivot Brackets

. 4

n.

Locking Brackets

. 4

p.

End Caps

. 8

q.

Screws (1-3/4˝)

. 5

r.

Screws (1-1/2˝)

10

s.

Screws (3/4˝)

. 2

t.

Lock Washers/ Washers

6, 4

u.

Wing-Nuts

17

v. Nuts

. 6

w. Band Separator

. 1

x. U-Bolt

. 3

y.

Cross Piece (for U-Bolt Assembly)

3

z. Antenna Saddle

. 1

*Quantities listed include those which may already be attached to antenna

NOTE: Cable, mast and mounting brackets are not included.

Assembly of UHF Portion

• Rotate reflector element rods into place. NOTE: When rotating element rods, grasp close to pivot and relieve spring pressure on pivot bracket detents. Don’t apply excess pres- sure to reflector element rods.

4

5

Image 3
Contents MANT901 Read Before Installation Antenna grounding and safety warningImportant Safety Notes Parts included Assembly of UHF PortionMast Assembly Mast not included Assembly of VHF PortionTechnical Support Lead-In WireLimited Lifetime Warranty Band SeparatorImportante Leer Antes DE LA Instalación Conexión a tierra de la antena y advertencia de seguridadNotas de seguridad importantes Montaje de la parte UHF Se incluyen las siguientes partesMontaje de la parte VHF Asistencia Técnica Cablede chimeneade derivaciónSeparador de bandas Garantía limitada de por vidaLire Avant ’INSTALLATION Mise à la terre de l’antenne et mise en gardeConsignes de sécurité importantes Assemblage de la partie UHF Assemblage de mât mât non inclus Assemblage de la partie VHFSéparateur de bande Assistance techniqueGarantie à vie limitée

SDV9011K/17, MANT901EN specifications

The Philips SDV9011K/17 and the MANT901EN are advanced television antennas designed to enhance your viewing experience by delivering high-quality digital signals. These models are characterized by their innovative design, superior performance, and user-friendly features, making them ideal for anyone looking to improve their TV reception without the hassle of satellite subscriptions or cable services.

The Philips SDV9011K/17 is an indoor antenna that boasts a sleek and modern aesthetics, allowing it to complement any interior without being obtrusive. This model supports a wide range of frequencies, making it highly versatile for different broadcasting standards. Equipped with a built-in amplifier, the SDV9011K/17 enhances signal strength, ensuring that you receive clear and stable channels, even in areas with weak reception. It supports HD and 4K content, making it a perfect choice for tech enthusiasts who demand the best visual quality for their favorite shows and sports events.

Another notable feature of the SDV9011K/17 is its easy installation process. The antenna can be set up in minutes, with no need for specialized tools or complex configurations. Users can position it on a tabletop, mount it on the wall, or stick it to a window for optimal signal strength, ensuring flexible placement options based on individual room layouts.

Meanwhile, the Philips MANT901EN is an outdoor antenna that takes performance to the next level. Its robust design is built to withstand harsh weather conditions, making it a reliable option for those living in challenging environments. With a longer range and advanced signal-gathering capabilities, the MANT901EN is capable of picking up signals from greater distances compared to standard indoor antennas.

The MANT901EN features a multi-directional design, eliminating the need for constant adjustments. Its innovative technology ensures that users can enjoy a wide variety of channels without the frustration of signal dropouts. Additionally, the antenna’s compact design makes it easy to install without taking up much space or diminishing the aesthetics of your property's exterior.

In conclusion, both the Philips SDV9011K/17 and MANT901EN antennas represent a smart choice for those seeking to enhance their television viewing experience. Their blend of modern design, easy installation, and superior performance characteristics ensure viewers can enjoy high-quality digital content without the added cost of cable subscriptions. Whether you are limited to indoor spaces or have the flexibility of an outdoor setup, Philips has solutions tailored for maximized enjoyment of free-to-air broadcasting.