Huffy M0012 manual Assemble the Front Wheel to the Fork Assembly, Loosen the Front Brakes

Assemble the Front Wheel to the Fork

Assembly

Loosen the Front Brakes:

1.Squeeze the two Brake arms together

(A).

2.Lift out the Brake Cable Guide (B) from the Guide Bracket (C).

Install the Front Wheel:

3.Set the Front Wheel (3) into the front fork (4) (fig 03).

4.Install wheel retainers (5) making sure the tabs are in the Fork Retainer Holes

(C).

5.Attach the front wheel with the Axle Nuts (6).

6.Tighten Axle Nuts to 21 ft-lbs.

WARNING: Do not use Nuts (6) without serrations to attach the front wheel.

6

B

A A C

fig 02

4

C

5 3

fig 03

NOTE: Ensure wheel spins freely without contacting fork or fender.

WARNING: Put the wheel in the center of the fork and tighten both nuts to the recommended torque of 21 ft.-lbs.

WARNING: Failure to obey these steps can allow the front wheel to loosen while riding. This can cause injury to the rider or to others.

12