Assembly
Setting Up the Handlebars
Note: This procedure is for one, two and four bolt Handlebar Stems.
1. If necessary, loosen the Handlebar Clamp Screw(s) (A) and rotate Handle- bar (2) into a comfortable riding posi- tion.
2.Tighten Handlebar Clamp Screw(s) (A) securely.
NOTE: Do not over tighten. Torque to
WARNING: If the handlebar clamp in not tight enough, the handlebar can slip in the stem. This can cause damage to the
handlebar or stem, and can cause loss of A control.
2
A
fig 05
2
fig 05a
A 2
3 1
2 4
fig 05b
14
