Huffy M0012 manual Maintenance Tires, Inflating the Tires

Maintenance

Tires

Maintenance:

•Frequently check the tire inflation pressure because all tires lose air slowly over time. For extended storage, keep the weight of the bicycle off the tires.

•Do not use unregulated air hoses to inflate the tire/tubes. An unregulated hose can suddenly over inflate bicycle tires and cause them to burst.

•Replace worn tires.

WARNING: Do not ride or sit on the bicycle if a tire is under inflated. This can damage the tire, inner tube and rim.

Inflating the Tires:

•Use a hand or a foot pump to inflate the tires.

•Service station meter-regulated air hoses are also acceptable.

•The maximum inflation pressure is shown on the tire sidewall.

•If two inflation pressures are on the tire sidewall, use the higher pressure for on- road riding and the lower pressure for off-road riding.

•The lower pressure will provide better tire traction and a more comfortable ride.

Before adding air to any tire, make sure the edge of the tire (the bead) is the same distance from the rim, all around the rim, on both sides of the tire. If the tire does not appear to be seated correctly, release air from the inner tube until you can push the bead of the tire into the rim where necessary. Add air slowly and stop frequently to check the tire seating and the pressure, until you reach the correct inflation pressure. See fig 26.

fig	26
Tire Bead Seated Correctly

34 Tire Bead NOT Seated Correctly