Huffy M0012 manual Maintenance Three-Piece Cranks various models

Maintenance

Three-Piece Cranks (various models)

Maintenance:

Both Crank Arms (A) were tightened to the spindle (B) at the factory. After riding the bicycle the first few times, make sure the crank arms have not loosened. If either crank arm has loosened during this “break-in” period, re-tighten or have it tightened by a bicycle service shop.

B

A

fig 24

Frequently check the tightness of the crank arms. If loose, tighten or have them tight- ened by a bicycle service shop.

WARNING: If you ride the bicycle with a loose crank arm, the crank arm may fall off. The spindle may also damage the crank arm.

NOTE: Torque crank arm nut to 395 in-lbs.

32