Threadless Style Stem | Huffy M0012 instruction

Handlebar and Stem Installation

WARNING: To prevent steering system damage and possible loss of control, completely seat Stem (1) onto Fork Tube (E).

Threadless Style Stem:

Note: This procedure applies to both the two-bolt Stem and four-bolt Stem (ﬁgs 01b and 01c):

1.Insert the Stem (1) onto the Fork Tube (E).

2.Point the Stem (1) towards the front of the bike and in line with the fork.

3.Tighten the stem bolts (C) se- curely.

4.Place Cap into stem and tighten screw securely (D).

1

D

C

E

Assembly

fig 01b

WARNING: Do not over tighten the stem bolts (C). Over tightening the stem bolts can damage the steering system and cause loss of control.

WARNING: The Front Brake	1
(28) must be positioned in FRONT of	1
the Fork (4) (ﬁg 01a)	D

C

E

fig 01c

11

Image 11

Huffy M0012 manual Threadless Style Stem

Contents

For Mountain Bikes Your Bike Model / Serial Number Purchase Date Model Name Owner’s Bicycle Identiﬁcation RecordFitting the Rider to the Bicycle Your Bike Use extra caution in wet weather Rules of the RoadMeanings of Warnings If you must ride at night or at time of poor visibility Your Bike Owner’s Responsibility Parts Assembly View Parts View Description Parts Assembly ListParts List Assembly Introduction Flat-blade Screwdriver AssemblySmall Adjustable Wrench Tools Needed Quill Style Stem Handlebar and Stem Installation Threadless Style Stem Loosen the Front Brakes Assemble the Front Wheel to the Fork AssemblyInstall the Front Wheel Re-attach Front Brake Cable Re-attache Front Brake Cable Assembly Setting Up the Handlebars To test the tightness of the handlebar clamp Testing Stem and Handlebar TightnessTo test the tightness of the stem Tighten the quick release lever Assembly Seat InstallationAttach Seat to Seat Post pre-assembled on some models If the Seat Post 9 moves in the Seat Tube B Testing Seat Clamp and Post Clamp TightnessTo test the tightness of the seat clamp and the post clamp If the seat moves in the Seat Clamp a ﬁg Tighten the pedals ﬁg Assembly Pedal Installation Installing Derailleur Guard on some models Reﬂector Brackets Installation Test the tightness of each Brake Shoe Maintenance Brake System Center brake shoes on rim Maintenance Final Brake Adjustment Before RidingStretching the cable ﬁg Check tightness of the cantilever mounting Bolt a Put the brake shoes the correct distance from the rim Maintenance Final Brake Adjustment Test the travel of each brake lever MaintenanceTest the tightness of the cable clamp ﬁg Maintenance Operation Operate the shift system as follows Shift SystemParts of the Shift System Maintenance Shift System These are the higher gear combinations Front Derailleur Adjustments Perform the Rear Derailleur Adjustments if Maintenance Rear Derailleur Adjustments Adjust the Index Shift System ﬁg Maintenance Maintenance Three-Piece Cranks various models To change the suspension AdjustmentSuspension Frame various models Inﬂating the Tires Maintenance Tires Maintenance Lubrication Repair and Service Lubrication Table What When How Crank Bearings Maintenance ReﬂectorsInspection of the Bearings Head Tube Bearings What is not covered by this Limited Warranty? Warranty Huffy Corporation Limited WarrantyWhat does this Limited Warranty cover? What must you do to keep the Limited Warranty in effect? What will Huffy do? WarrantyFor how long does this Limited Warranty last? How do you get service? Always Wear Your Helmet When Riding this Product