Front Derailleur Adjustments
Put the “high” adjusting screw (E) in the correct position as follows:
•Shift the chain onto the largest front sprocket and the smallest rear sprocket.
•Turn the “high” adjusting screw (E) so the right inside edge of the chain cage and the chain just do not touch.
NOTE: If the shift lever does not move easily:
•If the shift cable seems to stick, lubricate it.
•Do not lubricate the shift control.
•If the shift cable is sharply bent, rusted or has broken strands, replace it.
Perform the “Rear Derailleur Adjustments” if:
•The chain will not shift onto all the rear sprockets.
•The chain comes off the rear sprockets.
•The chain makes noise while on the smallest or largest rear sprocket.
•The rear derailleur rubs the spoke protector.
Maintenance
29
