Using the Oven Control
Flashing Display
When power is connected
or interrupted, oven display flashes. Press CLOCK to reset display. Clock may need to be reset.
Setting Electronic Clock
12 hour clock does not display AM, PM or military time. When power is connected or restored, display flashes until CLOCK or CANCEL pad is pressed.
1.Press CLOCK pad.
2.Press digit pads (1 through 0) until correct
3.Press START pad to set time, or time is set after 5 seconds of no adjustment.
Timer Signal
When time elapses, timer will sound three
Setting Minute Timer
Timer is a timer only. Electronic timer does not control bake, broil or
11 hours and 59 minutes.
1.Press TIMER ON/OFF pad.
2.Press digit pads (1 through 0) until desired
time displays.
• Timer begins counting down automatically after time is entered.
•To view clock while timer counts down, press CLOCK pad. Timer will return after approximately 3 seconds of no input.
3.Press and hold TIMER ON/OFF pad to cancel timer signal.
•After time elapses, timer beeps three
Resetting and Canceling Timer
To reset the time when remaining time is displayed, press
TIMER ON/OFF pad, then use the digit pads to enter the new time. To cancel timer when remaining time is displayed or when signal is beeping, press and hold TIMER ON/OFF pad for approximately
3 seconds or press CANCEL pad. CANCEL will stop all cooking functions if the oven is in use.
14