Basic Functions
E n g l i s h
IMPORTANT!
Before you operate the system, complete the preparation procedures.
Switching the system on
●Press STANDBY-ON / 2.
➜The system will switch to the last selected source.
●Press SOURCE (or CD, TUNER or AUX on the remote control).
➜The system will switch to the selected source.
●Press OPEN • CLOSEç.
To switch the system to standby mode
●Press
➜The system enters the standby mode with clock display.
●The volume level (up to a maximum volume level of 20), interactive sound settings, source and tuner presets will be retained in the player's memory.
Adjusting volume and sound
1Press the VOLUME 3 / 4
➜ Display shows the volume level VOL and a number from MIN1, 2, ...30, 31 MAX.
2Press DSC repeatedly to select the desired sound effect: ROCK/ JAZZ/ POP/ CLASSIC.
3Press DBB to switch bass enhancement on or off.
➜ Display shows: DBB.
4Press MUTE on the remote control to interrupt sound reproduction instantly.
➜ Playback will continue without sound and the display shows MUTE.
●To activate sound reproduction you can:
–press MUTE again;
–adjust the volume controls;
–change source.
12