Clock/Timer, Activating and deactivating

	Clock/Timer
En		➜ Display sequence shows CD, TUNER.
		➜	flashes.
glis	3	Press TIMER to confirm your desired mode.
h	4	Press VOLUME +/- to set the hours.

	5	Press TIMER again.
		➜ The clock digits for the minutes flash.
	6	Press VOLUME +/- to set the minutes.
	7	Press TIMER to confirm the time.
		➜ The timer is now set and activated.
		Activating and deactivating
		TIMER
	●	Press TIMER on the remote to turn off the
		timer or turn on to the last setting again.

Setting the clock

1In standby mode or system on, press and hold CLOCK SET on the remote control for more than 3 seconds.

➜SET CLOCK scrolls on the display.

➜The clock digits for the hours flash.

2Press VOLUME +/- to set the hours.

3Press CLOCK SET again.

➜ The clock digits for the minutes flash.

4Press VOLUME +/- to set the minutes.

5Press CLOCK SET to confirm the time.

➜If activated, the timer information will display for a few seconds, then the system resumes to the last active source or stays in standby mode.

➜If deactivated, “OFF” appears.

Note:

–The system will exit timer setting mode if no button is pressed within 90 seconds.

Activating and deactivating

SLEEP

The sleep timer enables the system to switch off by itself after a set period of time.The clock time needs to be set first before the sleep timer can be used.

Viewing the clock

Press SET CLOCK.

➜The clock time is displayed.

Setting the timer

●The system can be used as an alarm clock, whereby the CD,TUNER is switched on at a set time.The clock time needs to be set first before the timer can be used.

●During setting, if no button is pressed within 90

seconds, the system will exit timer setting mode automatically.

1In standby mode or system on, press and hold TIMER on the remote control for more than 3 seconds.

➜ SET TIMER and SELECT SOURCE scrolls on the display.

●Press SLEEP on the remote control once or more.

➜Display shows SLEEP and one of the sleep time options in sequence: 90,

75, 60,..., 45,30,15, OFF, 90. if

you have selected a time. Once SLEEP is activated, SLEEP scrolls across the display at repeated intervals.

●To deactivate, press SLEEP on the remote control once or more until OFF is shown, or press STANDBY-ONon the system or remote control.

2Press SOURCE or VOLUME +/- to select sound source.