Installation Instructions

IMPORTANT SAFETY INSTRUCTIONS

WARNING

To reduce the risk of fire, electrical shock, or injury when using your appliance, follow these basic precautions:

•Read all instructions before using the refrigerator.

•DANGER or WARNING: Risk of child entrapment.

Child entrapment and suffocation are not problems of the past. Junked or abandoned refrigerator-freezers are still dangerous. . . even if they will “just sit in the garage a few days.”

•Before you throw away your old refrigerator: Take off the door. Leave the shelves in place so that children may not easily climb inside.

•Never allow children to operate, play with, or crawl inside the refrigerator.

•Never clean refrigerator parts with flammable fluids. The fumes can create a fire hazard or explosion.

•Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any other refrigerator. The fumes can create a fire hazard or explosion.

-Save these instructions-

¾Before Using Your Appliance

•Remove the exterior and interior packing.

•Check to be sure you have all of the following parts:

•1 Ice Cube Tray

•1 Full Wired Shelf

•1 Half Wired Shelf

•1 Instruction Manual

•Before connecting the unit to the power source, let it stand upright for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.

•Clean the interior surface with lukewarm water using a soft cloth.

¾Installing Your Appliance

•This appliance is designed to be free standing installation only, and should not be recessed or built-in.

•Place your unit on a floor that is strong enough to support the unit when it is fully loaded. To level your unit, adjust the leveling leg at the bottom of the unit.

•Allow 5 inches of space between the back and sides of the unit, which allows the proper air circulation to cool the compressor and condenser.

•Locate the unit away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Extreme cold ambient temperatures may also cause the unit not to perform properly.

•Avoid locating the unit in moist areas.

•Plug the unit into an exclusive, properly installed-grounded wall outlet. Do not under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and/or grounding should be directed toward a certified electrician or an authorized Avanti Products service center.

•After plugging the appliance into a wall outlet, allow the unit to cool down for 2-3 hours before placing food in the refrigerator and chiller compartments.

RM4402B, RM4401W, RM4489SS specifications

Avanti Appliances has carved a niche in the compact appliance market with the introduction of innovative models such as the RM4489SS, RM4401W, and RM4402B. Each of these refrigerators boasts distinct features tailored to meet diverse consumer needs while ensuring efficiency and style.

Starting with the Avanti RM4489SS, this model is characterized by its sleek stainless steel finish, catering to modern aesthetics while providing durability. Its storage capacity is substantial, making it ideal for small families or individuals living in apartments. The refrigerator features a freezer compartment that operates effectively to keep frozen foods for extended periods. Additionally, the RM4489SS is equipped with adjustable shelves, allowing users to customize their storage according to their requirements. The energy efficiency of this model is commendable, helping users save on electricity bills while reducing their carbon footprint.

Next, the Avanti RM4401W is another appealing option, distinguished by its classic white finish that complements any kitchen décor. This model is designed for those who prioritize space and efficiency. With a compact design, the RM4401W is perfect for dorm rooms, offices, or small kitchens. One standout feature is its separate crisper drawer, which ensures that fruits and vegetables remain fresh longer. Additionally, it offers adjustable door bins that allow for versatile storage options. This refrigerator is known for its quiet operation, making it an excellent choice for environments where noise levels need to be minimized.

Finally, the Avanti RM4402B brings a modern twist with its bold black exterior. This model combines a stylish look with practicality, featuring a reversible door that enhances its versatility for placement in various spaces. It includes adjustable shelves, a removable shelf, and a precise temperature control system that ensures your food items are stored at optimum temperatures. The RM4402B stands out with its efficient LED lighting, brightening the interior while consuming less energy than traditional lighting. Its compact size makes it a smart choice for tight spaces without sacrificing style or performance.

In summary, whether it’s the stainless steel elegance of the RM4489SS, the classic simplicity of the RM4401W, or the contemporary flair of the RM4402B, Avanti's refrigerator models offer efficient cooling solutions with multiple features tailored to different consumer demands. With their energy-efficient technology and thoughtful designs, these refrigerators provide an ideal balance of form and function.