OPERATING YOUR WINE CHILLER
It is recommended you install the appliance in a place where the ambient temperature is between 72- 78 degrees Fahrenheit. If the ambient temperature is above or below recommended temperatures, the performance of the unit may be affected. For example, placing your unit in extreme cold or hot conditions may cause interior temperatures to fluctuate. The range of
Recommended Temperatures for Chilling Wine.
Red Wines | 58 - 65 ºF | 14 | - 18 ºC |
Dry / White Wines | 48 - 57 ºF | 10 | - 13 ºC |
Rose Wines | 49 - 51 ºF | 9 - 11 ºC | |
Sparkling Wines | 40 - 47 ºF | 5 | - 8 ºC |
|
|
|
|
Wine Chiller | Control Panel |
|
|
| 1 | 2 | 3 | 4 |
| 5 | 6 | 7 | 8 |
|
|
|
|
|
|
|
|
|
|
|
|
| 1 | Power Button |
|
| 5 | Interior Light ON/OFF Button |
|
| ||
| 2 | ECON – Energy Saver Program Button |
| 6 | ºF/ºC Selector Button |
|
|
| ||
| 3 | Temperature Selector Buttons |
| 7 | Alarm Reset Button |
|
|
| ||
| 4 | Electronic Display |
|
| 8 | Alarm Indicator Lights |
|
|
| |
You can select temperature display setting from Fahrenheit to Celsius degree by pushing the ºF/ºC button/mark. Fahrenheit or Celsius degrees indicator will appear in blue color in the temperature display window.
Basic Operation |
|
¬ ON/OFF POWER |
|
To turn ON or OFF the appliance, press the | button/mark and hold for 3 seconds. |
¬SETTING THE TEMPERATURE CONTROL
You can press UP | and DOWN | buttons/marks to control the internal temperature . |
The degrees indicators will appear in the display window.
•The temperature that you desire to set will increase 1ºF or 1ºC if you push the UP button/mark once, on the contrary the temperature will decrease 1ºF or 1ºC if you push the
DOWN 
button/mark once.
NOTE:
•If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before restarting the unit. If you attempt to restart before this time delay, the Wine Chiller will not start.
•When you use the wine chiller for the first time or restart the wine chiller after having been shut off for a long time, there could be a few degrees variance between the temperature you select and the one indicated on the LED readout. This is normal and it is due to the length of the activation time. Once the wine chiller is running for a few hours everything will be back to normal.
9