Special Features, ¬ Storage, ¬ Interior Light

SPECIAL FEATURES

Your unit is equipped with an ECONOMY (Vacation) MODE. This operating mode will cut energy consumption by turning off all indicator lights and LED display while in the ECON mode.

To activate the ECON mode press and hold the ECON selector button until the green indicator light is illuminated.

To deactivate the ECON mode and return to normal operation, simply press the ECON selector button again.

A special added feature is a POWER LOSS / OUTAGE indicator and alarm. In the event of a power outage or loss the PWR LOSS indicator will flash intermittently and a single alarm will sound.

To reset the alarm simply press the RESET button shown below.

If at anytime the door has been left open or ajar for more than 5 minutes, the DOOR indicator and alarm will be activated.

The DOOR indicator light will flash intermittently and an alarm will sound every 60 seconds.

To reset the alarm simply close the door properly or press the RESET button shown below.

An added feature to your wine cellar is the FILTER replacement indicator. Once your unit has been in use for 12 months, the FILTER indicator light will flash intermittently to remind you to change the filter.

After changing the filter press the RESET button shown below to restart the timing program to remind you again in another 12 months to change the filter.

The RESET button is used to set-up any of the warning indicators shown above (PWR LOSS, DOOR, FILTER). Once pressed the above indicators are reset and returned to their ready state.

¬STORAGE

Many bottles may differ in size and dimensions. As such the actual number of bottles you may be able to store may vary.

NOTE:

Capacity:

Bottle capacities are approximate maximums when storing traditional Bordeaux 750 ML bottles and include bulk storage.

¬INTERIOR LIGHT

•You can turn the interior light on or off by pushing the button marked

¬CONTROL PANEL LOCK

•Your Wine chiller is equipped with an automatic Control panel lock function. This function will prevent any unwanted changes to your temperature or power settings.

•The lock function will activate automatically 12 seconds after the last time a button is pushed on the control panel.

• To unlock the control panel lock press and hold the (UP) and the (DOWN) buttons simultaneously for 3 seconds the control panel will beep once indicating that the control panel is active and the settings can be changed.