Beverage-Air NC49, NC33, NC41, NC27 operation manual Unit Operation, Power FAILURE/FREEZER Failure

Page 6

UNIT OPERATION

SETTING THE TEMPERATURE CONTROL

To access the temperature control, the right side grill should be removed using a Phillips screw driver.

The temperature control is factory pre-set to provide satisfactory product storage products. However, the temperature control is adjustable to provide a range of temperatures for your personal satisfaction. If a colder temperature is desired, turn the control clockwise. Allow several hours for temperature to stabilize between adjustments.

POWER FAILURE/FREEZER FAILURE

Note: Do not open the freezer door unnecessarily if power to the freezer is off for several hours

If a power failure occurs, frozen foods will stay frozen for at least 2 hours if the freezer is kept closed. If the power failure continues, pack seven or eight pounds of dry ice into the freezer every 24 hours. Cover the product with a cardboard sheet or one inch polyurethane sheet and close the lids. Always wear gloves and use caution when handling dry ice.

If the freezer has stopped operating, see "Freezer does not run" in the Service Checklist Section of this manual. If you cannot solve the problem, call an authorized service immediately. Do not allow inexperience people to repair or modify the electrical wiring and/or refrigeration components.

•••• www.beverage-air.com• Pg. 6 ••••

Image 6
Contents Installation and Operation Manual Table of Contents Storage of the Equipment ApplicationDirections for Storage and Handling of the Equipment UncratingPlacing and Installing the Equipment Moving the EquipmentEnergy Savings Ideas Basket Specifications Electrical RequirementsProduct Loading Power FAILURE/FREEZER Failure Unit OperationService Checklist Occurrence SolutionPRESCRIPTIONS, Prohibitions and Other Uses for the Equipment Maintenance Guidelines Removal of FrostCleaning the Inside LID Removal Technical Assistance