Polycom E340, H340, I640, 72-1065-09 manual Do not Power OFF

SpectraLink Corporation	Configuration and Administration–NetLink e340/h340/ i640 Wireless Telephone
	NetLink Telephony Gateway and SpectraLink Radio Protocol
Message	Description	Action
DHCP Error (1-5)	DHCP Error 1	The handset cannot locate a DHCP server. It
		will try every 4 seconds until a server is
		located.
	DHCP Error 2	The handset has not received a response from
		the server for a request for an IP address. It
		will retry until a server is found.
	DHCP Error 3	The server refuses to lease the handset an IP
		address. It will keep trying.
	DHCP Error 4	The server offered the handset a lease that is
		too short. The minimum lease time is 10
		minutes but SpectraLink engineers
		recommend at least one hour minimum lease
		time. The handset will stop trying. Reconfigure
		the server and power cycle the handset.
	DHCP Error 5	Failure during WEP Key rotation process
		(proprietary feature).
DHCP Lease Exp.	y…y = DHCP server IP address	The handset failed to renew its DHCP lease,
yyy.yyy.yyy.yyy	DHCP is not responding to renewal	either because the DHCP server is not running,
	attempts (at least one renewal	or because the configuration has been
	succeeded).	changed by the administrator. The handset
		will attempt to negotiate a new lease, which
		will either work, or change to one of the above
		DHCP errors (1-4).
DHCP NACK Error	y…y = DHCP server IP address	The DHCP lease currently in use by the
yyy.yyy.yyy.yyy	DHCP server explicitly refused renewal.	handset is no longer valid, which forces the
		handset to restart. This problem should
		resolve itself on the restart. If it does not, the
		problem is in the DHCP server.
DL not on sector	Handset software download files are	Download new software from the SpectraLink
	incorrect or corrupted.	site per section 8 Software Maintenance.
DO NOT POWER OFF	The handset is in a critical section of the	None. Do not remove the Battery Pack or
	software update.	attempt to power off the handset while this is
		displayed. Doing so may require the handset
		to be returned to SpectraLink to be recovered.
Duplicate IP	The handset has detected another device	If using DHCP, check that the DHCP server is
	with its same IP address.	properly configured to avoid duplicate
		addresses.
		If using Static IP, check that the handset was
		assigned a unique address.
Erase Failed	Download process failed to erase the	Operation will retry but may eventually report
	memory in the handset. This operation	the error "int. error: 0F". Power cycle the
	will retry.	handset.
Erasing Memory	Handset has determined that a download	None. When the progress bar fills the display
	should occur and is erasing the current	line the erase operation is complete.
	software from memory. This message	Do not turn the handset off during this
	also displays a progress bar. When the
		operation.
	progress bar fills the display line the
	erase operation is complete.

PN: 72-1065-09-J.doc Page 42