Polycom I640, H340, E340, 72-1065-09 manual Handset Display

SpectraLink Corporation	Configuration and Administration–NetLink e340/h340/ i640 Wireless Telephone
	NetLink Telephony Gateway and SpectraLink Radio Protocol

2.5Handset Display

See the LinkPlus Interface Guide for your PBX for information about how the handset emulates the features of the PBX utilized at your site. The following general explanations may not apply due to differences in PBX configurations.

Alphanumeric

Display information provided by the PBX when the handset is off-hook will be passed directly to the handset main display. Certain characters may be used by the PBX that are not implemented in the handset, such as definable and special characters.

Signal strength

The Signal Strength icon indicates the strength of the signal from the access point and can assist the user in determining if the handset is moving out of range. It is always present on the display in the upper left corner.

Battery charge

The Battery icon indicates the amount of charge remaining in the Battery Pack. It is always present on the display in the upper right corner. There are three levels and when only one level remains there is limited talk time remaining and the Battery Pack needs to be charged.

Voicemail

The Voicemail icon is activated when a new voice mail message is received if the feature is supported by the phone emulation. It appears to the right of the Signal Strength icon.

Download

Indicates that the handset is checking for or downloading code. This icon only appears while the handset is running the over-the-air downloader. It appears to the right of the Signal Strength icon in the same location as the Voicemail icon.

Ringing and tones

The ringing types (normal or vibrate) are selected by the handset user and are not accessible or changeable by the PBX. The audible and vibrating ringer on the

PN: 72-1065-09-J.doc Page 9