SpectraLink Corporation

Configuration and Administration–NetLink e340/h340/ i640 Wireless Telephone

 

NetLink Telephony Gateway and SpectraLink Radio Protocol

4.License Management

The NetLink Wireless Telephone system supports a number of different IP protocol integrations. All NetLink e340, h340, and i640 Wireless Telephones are shipped from SpectraLink with a generic software load that allows them to associate to a wireless LAN and download their functional software from a TFTP server. The handsets may not function properly without downloading appropriate software.

The following details the process to properly configure handsets and download software via over-the-air file transfer.

4.1Requirements

A wireless LAN must be properly configured and operational through the use of 802.11b wireless access points.

NetLink Telephony Gateway must also be connected to your network and completely operational, and the handset must be registered to it.

The NetLink Telephony Gateways have a TFTP server and must be available on the network in order to load the appropriate software into the handsets. Most installations choose to take advantage of the TFTP server that accompanies the NetLink Telephony Gateway, making a separate TFTP server unnecessary.

Finally, ensure that the Battery Pack on the handset is fully charged.

PN: 72-1065-09-J.doc

Page 26

Page 26
Image 26
Polycom E340, H340, I640, 72-1065-09 manual License Management, Requirements