SpectraLink Corporation | Configuration and |
| NetLink Telephony Gateway and SpectraLink Radio Protocol |
6.3Syslog Mode
A syslog server must be present on the network in order for the handset to send the log messages and have them saved. The syslog server will be found with DHCP option 7 if the handset is using DHCP. If static addresses are configured, the syslog server’s IP address can be configured statically in the Admin menu.
If the syslog server address is blank (000.000.000.000 or 255.255.255.255) or the handset is using DHCP and no option 7 is received from the DHCP server, the handset will not send any syslog messages.
Admin menu options:
•*Disabled turns syslog off.
•Errors causes the handset to log only events that we consider to be an error (see below).
•Events logs all errors plus also some other interesting events (see below).
•Full logs all the above plus a running stream of other quality information (see below).
The table below lists the syslog messages and which level of logging will produce them:
Message type
Errors
Events
Full
Failed Handoff | Yes |
|
|
Successful Handoff | No |
|
|
Security Error | Yes |
|
|
Call Start/End | No |
|
|
Audio stats | No |
|
|
Audio error threshold exceeded | Yes |
|
|
Radio stats | No |
|
|
Radio error threshold exceeded | Yes |
|
|
Yes
Yes
Yes
Yes
No
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes (every 5 secs)
Yes
Yes (every 5 secs)
Yes
All syslog messages will include:
•Date and time (to 1/100th of second) since handset power on (currently set to
•Handset’s MAC address
•Handset’s IP address
•Sequence number
The table below lists the additional items in each Message type:
Failed Handoff
(Sent whenever the handset attempted to handoff, but failed trying.)
Failed AP MAC
Failed AP signal strength Current AP MAC Current AP signal strength Failure reason
PN: | Page 34 |
