Polycom H340, I640, E340, 72-1065-09 manual System Info

SpectraLink Corporation	Configuration and Administration–NetLink e340/h340/ i640 Wireless Telephone
	NetLink Telephony Gateway and SpectraLink Radio Protocol

Display Contrast The display may need to be adjusted for different lighting situations. Contrast may be set by pressing the Up and Down side buttons until the desired contrast is displayed and then pressing the OK softkey.

Keypad Autolock The handset may be set to lock the keypad automatically when in standby mode. The automatic locking function of the keypad may be disabled (the default) or adjusted for a 5, 10 or 20 second delay before locking.

System Info

Phone IP Addr Displays the IP address currently assigned to the handset.

Gateway IP Addr Displays the IP address currently assigned to the NetLink Telephony Gateway.

Firmware Version Displays the software version running the handset. The MAC address is the hardware identification number and is set at the factory. Three code numbers correspond to the three files that each version uses.

(MAC address)

(downloader code) (functional code) (phintl file)

OK Up

Downloader: pd11gl3.bin

Functional: pd11spc3.bin

Phintl: phintl24.bin

Extension Displays the extension currently assigned to the handset. This number is for display purposes only; entering it does not assign the extension in the host telephone system.

Push-to-talk The NetLink i640 Wireless Telephone incorporates push-to-talk functionality. PTT may be allowed or disallowed in the Admin menu. If allowed, the user may enable or disable locally, and may set the channel, tone volume and audio volume. The menu for push-to-talk does not appear if PTT is disallowed on the Admin menu or if no channel is enabled on the Admin menu.

Channel

Enable/Disable

Audio Volume

Tone V olume

OK Up

PN: 72-1065-09-J.doc Page 24