SpectraLink Corporation | Configuration and |
| NetLink Telephony Gateway and SpectraLink Radio Protocol |
5.Testing a Handset
Verify proper registration and operation of each handset by performing the following tests on the handset in an active wireless area.
1.Power on the handset by pressing Power On. You will see a series of messages displayed as the handset acquires the system. The handset should display the user extension or dashes if no extension is programmed. Any error messages should clear.
2.Press the Start Call key. The extension number should clear and you should hear dial tone. On some digital systems, depending on how the telephone system is programmed, you may have to select a line to get dial tone. Place a call and listen to the audio quality. End the call by pressing the End Call key.
3.Place a call to the handset and verify ring, answer, clear transmit, and clear receive audio.
4.Use the FCN key to verify all softkey programmed features on the handset. Use the MENU key and scroll through the Shortcut menu. Ensure the features displayed on the Shortcut menu match those displayed in the softkey function display area.
5.Press the End Call key. Any line indicators should turn off and the extension number display will return.
If any of these steps fails to operate as described, refer to section 9 Troubleshooting for corrective action.
PN: | Page 28 |
