Beverage-Air, Use of Extension Cords | Beverage-Air Refrigerator

BEVERAGE-AIR®

INSTALLATION AND OPERATING INSTRUCTIONS

1.INSTALLATION

a. Receiving Inspection:

Upon receipt, check all packages for accessories or optional components, including legs, caster, shelves or pan slides. Keys for door locks are attached to one of the doors. (When lock is installed.)

b. Legs & Casters:

Each cabinet is provided with four threaded legs or casters shipped separately. Legs and casters screw directly into the weld nut provided in each corner of the base.

c. Leveling: To provide adequate drainage and proper door alignment and operation, it is necessary that the cabinet be level. Level cabinet from front to rear and from side to side by adjusting leg inserts. This should be done after cabinet has been set in its final operating position.

d. Shelves: Included are three epoxy coated wire shelves per door opening (3 per HF1/HR1, 6 per HF2/HR2, 9 per HF3/HR3). Shelf spacing is adjustable with enclosed shelf supports to suit requirements. (Figure 1.)

e. Locating Cooler:

For proper operation of the cooler, provide at least three inches of space between the rear of the cabinet and any adjacent wall or fixture and minimum 12 inches of clearance between the top of the cooler and the ceiling or any other fixture.

2.OPERATION

a. Electrical Supply & Connections: A wiring diagram is provided with this manual. It is important that the cabinet be connected into a separate single circuit. Before connecting cabinet, check line voltage to assure it is compatible with the voltage specified on the data plate. (See Fig. #4). Low line voltage is often the cause of service complaints. Wiring should be sufficient to carry the electrical load and to meet local codes. A qualified electrician should make the necessary electrical connections. Be sure cabinet is properly grounded. Check supply voltage after unit has started to be sure circuit is not overloaded.

208/230V Field Wired Unit Cabinet must be connected to a 208/230V/60Hz grounded supply. Prior to connecting power, ensure voltage between any supply conductor and neutral is 115V. Failure to properly wire unit will void all warranties and may result in property damage.

Use of Extension Cords:

NEVER USE EXTENTION CORDS. BEVERAGE AIR WILL NOT WARRANTY ANY FREEZERS AND REFRIGERATORS THAT HAVE BEEN CONNECTED TO AN EXTENSION CORD.

b. Compressor Mounts: (HF3 Freezer -88 Model Only) The compressor is secured with steel banding at the factory to prevent damage during shipping. Before operating compressor cut the banding and remove. This will allow free movement of the compressor while unit is running.

c. Initial Start-Up: Turn power on and check to verify that compressor and condenser fan are running. On freezers, evaporator fans are delayed at start up until the evaporator has pulled down to predetermined temperature. Once fans are running, a switch behind each door will stop fans while door is open.

d. Interior Lights:

In the solid door models, interior lights are actuated by a door switch.

Refrigerator specifications

Beverage-Air is a well-regarded name in the refrigeration industry, known for providing reliable solutions tailored for commercial use. Their refrigerators are specifically designed to meet the rigorous needs of food service establishments, convenience stores, and retail environments. One of the standout features of Beverage-Air refrigerators is their energy efficiency. Many models are ENERGY STAR certified, which means they use less energy while still delivering top-notch refrigeration performance. This not only helps businesses reduce their carbon footprint but also results in substantial savings on energy bills.

In terms of capacity, Beverage-Air offers a diverse range of units, from compact countertop models to spacious upright refrigerators. This versatility allows businesses to select the right size for their specific requirements, ensuring optimal organization and easy access to beverages and perishables. Additionally, the adjustable shelving in these refrigerators enhances storage flexibility, accommodating various sizes and types of products.

Beverage-Air refrigerators are built with user-friendly controls that allow for easy temperature management. Many models include digital temperature displays and intuitive interfaces, simplifying the process of monitoring and adjusting settings. This feature is crucial for maintaining food safety standards, as it ensures consistent temperatures that prevent spoilage.

Durability is another key characteristic of Beverage-Air refrigerators. Constructed with high-quality materials, such as stainless steel exteriors and heavy-duty interiors, these units are designed to withstand the rigors of daily commercial use. The design not only provides a professional appearance but also facilitates thorough cleaning, promoting better hygiene practices in food service environments.

Technologically, Beverage-Air incorporates advanced cooling systems that ensure rapid temperature recovery, making their refrigerators efficient during peak usage times. Many models feature environmentally friendly refrigerants, aligning with modern sustainability initiatives. Moreover, options like glass door configurations enhance visibility, allowing customers to easily view product selections, further promoting sales.

In summary, Beverage-Air refrigerators offer a robust combination of energy efficiency, flexibility, durability, and advanced technology. Their dedication to quality and innovation positions them as a leader in the commercial refrigeration market, providing businesses with reliable solutions that enhance operational efficiency and customer satisfaction. Whether for beverages, dairy, or other perishables, Beverage-Air continues to be a trusted choice for establishments looking to optimize their refrigeration needs.