6Operating the dishwasher
•Turn the water tap on. Open the door of the machine.
•Check that the upper and lower arms can rotate freely.
•Add the detergent
•Close the door of the machine
•Push in the on/off button and check that the programme indicator lights come on.
•Check the salt and rinse aid level indicator lights before you start the machine. If necessary add salt and rinse aid.
•Select the required programme by referring to the programme chart. Choose the desired programme
•Press start / stop button and check that the start / stop indicator light comes on.
!Do not open the dishwasher door whilst the appliance is in operation. However, in case the door is opened while the machine is working, then a safety mechanism ensures the machine immediately stops. Water may be very hot, so be careful.
!Care must be taken if opening the door, as steam and water will escape.
• Press the on/off button after the programme is completed. The indicator lights will go off.
• Unload the baskets - we recommend to turn off the water tap when not in use
!Just after the dishwasher has started the selected programme, if you find that you want to put in another item to be washed, open the door carefully. Care must be taken if opening the
20
door, as steam and water will escape. Then after putting in the item, close the door. The dishwasher will resume operation.
Hot Air Drying
Hot Air Drying ensures your dishes are dried efficiently.
Unloading dishwasher
Dishes should be allowed to cool for about 15 - 30 minutes after the end of the programme.
You will improve drying results by leaving the dishwasher door ajar for at least
!Care must be taken when opening the door, as steam will escape.
First unload the lower, then the upper rack. This prevents drops of water from falling onto the full lower basket when the dishes in the upper basket are being removed.
GB