Beko UL584APS, UL584APW manual Transportation Instructions, Installation Instructions

Page 8

3Installation

Transportation Instructions

1.The appliance should be transported only in a vertical upright position. The packing as supplied must be intact during transportation.

2.If during the course of transport the appliance has to be transported horizontally, it must only be laid on its right hand side when standing in the front of the appliance. After bringing it to upright position,it must not be operated for at least 4 hours to allow the system to settle.

3.Failure to comply with the above instructions could result in damage occuring to the appliance. The manufacturer will not be held responsible if these instructions are disregarded.

4.The appliance must be protected against rain, moisture and other atmospheric influences.

5.Empty any water in the drain tray before moving see section “Defrosting” and “Cleaning & Care” for further information

IMPORTANT :

Make sure the plastic evaporating pan at the back of the product collects water properly.

IMPORTANT:

Care must be taken while cleaning

/carrying the appliance to avoid touching the bottom of the condenser metal wires at the back of theappliance as you might injure your fingers and hands.

IMPORTANT:

This appliance is not designed for stacking with any other appliance.

When positioning your appliance, take care not to damage your flooring, pipes,wall coverings etc. Do not move the appliance by pulling by the door or handle.Do not attempt to sit or stand on top of your appliance as it is not designed for such use. You could injure yourself or damage the appliance.

IMPORTANT:

Make sure that mains cable is not caught under the appliance during and after carrying / moving the appliance, to avoid the mains cable becoming cut or damaged.”Do not allow children to play with the appliance or tamper with the controls.

BEKO declines to accept any liability should the instructions not be followed.

Installation Instructions

1.If possible avoid placing the appliance near cookers, radiators or in direct

sunlight as this will cause the compressor to run for long periods. If installed next to a source of heat or refrigerator, maintain the following minimum side clearances:

From Cookers 2” (50 mm) From Radiators 12” (300 mm)

From Refrigerators or Larder Fridge 1” (25 mm)

2.No gap is required at sides and top. See item 3 below to ensure a gap is obtained at the rear of the appliance. If a gap is available on side and top, retain it if possible as it would improve the air circulation around the appliance.

8

EN

Page 7 Page 9
Image 8
Page 7 Page 9
Contents UL584APW UL584APS Larder FridgesSymbols and their descriptions Please read this manual firstInstallation Using your refrigeratorTemperature Control Your refrigeratorYour refrigerator Movable shelvesDo not damage the refrigerant circuit Electrical requirements Energy saving tipsCompliance with rohs directive Package informationTransportation Instructions InstallationInstallation Instructions Page Repositioning The Door Page Before operating Final CheckUsing your refrigerator Arrangement Examples See diagramTemperature Control And Adjustment Replacing The Interior Light Bulb See Diagram DefrostingMaintenance and cleaning Problem Solvıng Dos and DontsGuarantee Details What is covered?What is not covered? Important notesHow To Obtain Service Model No Serial No Retailer Date of purchaseBelow UK Mainland & Northern Ireland Republic of IrelandPart no57 1227

UL584APW, UL584APS specifications

Beko has made a significant mark in the home appliance industry with its innovative designs and advanced technologies. The Beko UL584APS and UL584APW stand out as excellent models in their range of freestanding refrigerators, catering to modern lifestyle needs with functionality and style.

Both models feature a sleek and contemporary design, ensuring they blend seamlessly into any kitchen environment. Available in two stunning finishes, the UL584APS presents a stylish silver exterior, while the UL584APW shines with its clean white finish. This variety allows homeowners to choose an appliance that matches their kitchen aesthetic.

One of the main features of these refrigerators is the spacious interior layout. With a generous capacity, the UL584APS and UL584APW offer ample room to store groceries, leftovers, and beverages. The adjustable shelves and door balconies provide flexibility, enabling users to customize the interior as per their storage needs. Additionally, the full-width crisper drawer ensures that fruits and vegetables stay fresh for longer periods, promoting a health-conscious lifestyle.

The Beko UL584 series employs advanced cooling technologies that enhance food preservation. The Frost Free feature prevents ice buildup, eliminating the need for manual defrosting and ensuring consistent cooling throughout the refrigerator. Moreover, the LED lighting system illuminates the interior, making it easy to find items even in low light.

Energy efficiency is another hallmark of the Beko UL584 models. These refrigerators are designed to consume less energy while delivering optimal performance, making them an eco-friendly choice for consumers who prioritize sustainability. With an A+ energy rating, they allow users to save on electricity bills without compromising functionality.

To further enhance user convenience, both models come equipped with a reversible door feature, allowing flexibility in installation to fit various kitchen layouts. Stability and reliability are ensured, thanks to Beko's commitment to quality manufacturing.

In summary, the Beko UL584APS and UL584APW are remarkable refrigerators encapsulating modern technology, efficiency, and style. Their spacious interiors, advanced cooling systems, and energy-saving capabilities make them ideal choices for those seeking a dependable and attractive appliance for their homes.
Top Page Image Contents