6Maintenance and cleaning
**We recommend that you switch
off the appliance at the socket outlet and pull out the mains plug before cleaning.
**Never use any sharp abrasive instrument, soap, household cleaner, detergent and wax polish for cleaning.
**Use luke warm water to clean the cabinet of the appliance and wipe it dry.
**Use a damp cloth wrung out
in a solution of one teaspoon of bicarbonate of soda to one pint of water to clean the interior and wipe it dry.
**Make sure that no water enters the temperature control box.
**If the larder refrigerator is not going to be used for a long period of time switch it off, remove all food, clean it and leave the door ajar.
**Any dust that gathers on the condenser, which is located at the back of the appliance, should be removed once a year with a vacuum cleaner.
**Check door seals regularly to ensure they are clean and free from food particles.
**Removal of door rack :
**To remove a door rack, remove all the contents and then simply push the door tray upwards from the base.
**Make sure that the special plastic container (drain tray) at the back of the appliance which collects defrost water is clean at all times. If you want to remove the tray to clean it follow the instructions below :
•Switch off at the socket outlet and pull out the mains plug.
•Push the lug down with the tip of a screw driver & pull out firmly.
•Clean the drain tray and wipe it
dry.
•Reassemble reversing the sequence and operations.
**Removal of Chiller Zone
Compartment Drawer:
Pull it out as far as possible and then lift up and remove it completely.
Should the light fail to work switch off at the socket outlet and pull out the mains plug.
Use a cross headed screw driver to remove the light diffuser cover.
Then ensure the bulb is screwed in until it is secure in the bulb holder.
Replace the plug and switch on.
If the bulb functions, reassemble by reversing the above procedure, ensure the top cover is in place.
19
EN