4Before operating
STARTING
Final Check
Before you start using the refrigerator check that:
1.The front feet have been adjusted so the appliance is level.
2.The interior is dry and air can circulate freely.
3.Clean the interior as recommended under “CLEANING AND CARE.”
4.Insert the plug into the wall socket and switch on the electricity supply. When the door is open the interior light will come on.
5.You will hear a noise as the compressor starts up. The liquid and gases sealed within the refrigeration system may also give rise to noise, whether the compressor is running or not which is quite normal.
6.We recommend that you set the thermostat knob at 3 (three) and monitor the temperature to ensure the appliance
maintains desired storage temperatures (See section Temperature Control and Adjustment).
7.Do not load the appliance immediately it is switched on. Wait until the correct storage temperature has been reached.
We recommend that you check the temperature with an accurate thermometer
(see; Temperature Control and
Adjustment).
Important Note :
Ice formation at the back is normal, do not worry. (See Defrosting) fan guard as they may cause the cooling system to block and therefore operate less efficiently.
14
EN