Beko TLD 673 APW, TLD 673 APB manual Replacing the Interior Light Bulb

Page 11

REPLACING THE INTERIOR LIGHT BULB

Should the light fail to work, proceed as follows.

1.Switch off at the socket outlet and pull out the mains plug.

You may find it useful to remove shelves for easy access.

2.Remove the light diffuser cover screw. Use cross-headed screw driver.

3.Pull off the light diffuser cover and remove the light bulb.

4.Replace the burnt-out light bulb.

5.Reassemble reversing the sequence and operations. First ensure the top of the cover is in place.

6.Carefully dispose of the burnt-out light bulb immediately.

“Replacement light bulb can easily be obtained from a good local electrical or DIYstore.”

10

EN

Image 11

Contents TLD 673 APB TLD 673 APW This manual Symbols and their descriptionsPlease read this manual first Water dispenser Cleaning Installation Do’s and Don’tsYour refrigerator Page Electrical Requirements IMPORTANT! Fitting a Different Plug Transportation Instructions InstallationInstallation Instructions Page Special Container Replacing the Interior Light Bulb Reversing the Doors Page 180 Important Note Before operatingStarting Chiller Zone Compartment Drawer Using your refrigeratorTemperature Control and Adjustment of Fridge Page Filling in the water tank of water dispenser Water dispenserWater tray Maintenance and cleaning Do’s and Don’ts Problem SolvingHOW to Obtain Service Important notes What is covered?What is not covered? 48 7474 0003/AB