Beko FN 130430 manual Troubleshooting

Page 22

7Troubleshooting

Please review this list before calling the service. It will save your time and money. This list includes frequent complaints that are not arising from defective workmanship or material usage. Some of the features described here may not exist in your product.

The refrigerator does not operate.

The plug is not inserted into the socket correctly. >>>Insert the plug into the socket securely.

The fuse of the socket which your refrigerator is connected to or the main fuse have blown out. >>>Check the fuse.

Condensation on the side wall of the fridge compartment (MULTIZONE, COOL CONTROL and FLEXI ZONE).

Ambient is very cold. >>>Do not install the refrigerator in places where the temperature falls below 10 °C.

Door has been opened frequently. >>>Do not open and close the door of refrigerator frequently.

Ambient is very humid. >>>Do not install your refrigerator into highly humid places.

Food containing liquid is stored in open containers. >>>Do not store food with liquid content in open containers.

Door of the refrigerator is left ajar. >>>Close the door of the refrigerator.

Thermostat is set to a very cold level. >>>Set the thermostat to a suitable level.

Compressor is not running

Protective thermic of the compressor will blow out during sudden power failures or plug-out plug-ins as the refrigerant pressure in the cooling system of the refrigerator has not been balanced yet. The refrigerator will start running approximately after 6 minutes. Please call the service if the refrigerator does not startup at the end of this period.

The fridge is in defrost cycle. >>>This is normal for a full-automatically defrosting refrigerator. Defrosting cycle occurs periodically.

The refrigerator is not plugged into the socket. >>>Make sure that the plug is fit into the socket.

Temperature settings are not made correctly. >>>Select the suitable temperature value.

There is a power outage. >>>Refrigerator returns to normal operation when the power restores.

The operation noise increases when the refrigerator is running.

The operating performance of the refrigerator may change due to the changes in the ambient temperature. It is normal and not a fault.

22

EN

Image 22
Contents Refrigerator Explanation of symbols Maintenance and cleaning Your Freezer General safety Important Safety WarningsOr unplugging your appliance Respect to electrical safety Do not plug the refrigerator if the wall outlet is loose Child safety For products with a water dispenserThings to be done for energy saving Package informationHC warning Do not forgetPay attention to keep your food in closed containers Before you start the refrigerator InstallationElectrical connection Disposing of the packaging Placing and InstallationDisposing of your old refrigerator Door Open Warning Adjusting the legsThis feature is optional Changing the door opening directionPreparation Quick Freeze Indicator Using your refrigeratorIndicator Panel Quick Freeze FunctionHigh Temperature/Error Warning Indicator Temperature IndicatorsEco-Fuzzy Special Economic Usage Indicator Economic Usage Indicator Economic Usage Indicator turns onDual cooling system Freezing fresh foodRecommendations for preservation of frozen food Deep-freeze information DefrostingPlacing the food Ice PackMaintenance and cleaning Protection of plastic surfacesTroubleshooting Page Page Page Toll Free Toll Free 1300AUBEKO Beko Customer CareToll Free 0800NZBEKO 57 3748 0000/AD