Beko COOL54FW, COOL54FS manual Transportation Instructions, Installation Instructions

Page 8

3Installation

TRANSPORTATION

INSTRUCTIONS

1.The appliance should be transported only in a vertical upright position. The packing as supplied must be intact during transportation.

2.If during the course of transport the appliance has to be transported horizontally, it must only be laid on its right hand side when standing in the front of the appliance. After bringing it to upright position,it must not be operated for at least 4 hours to allow the system to settle.

3.Failure to comply with the above instructions could result in damage occuring to the appliance. The manufacturer will not be held responsible if these instructions are disregarded.

4.The appliance must be protected against rain, moisture and other atmospheric influences.

5.When positioning your appliance take care not to damage your flooring, pipes, wall coverings etc. Do not move the appliance by pulling by the door or handle.

6.Empty any water in the drain tray before moving. See section

‘Defrosting’ and ‘Care & cleaning’ for further information.

7.Make sure that the defrost water pipe at the back of the product is fixed to the plastic evaporating pan on the top of the compressor, to avoid defrost water spillage on the floor.

IMPORTANT : Care must be taken while cleaning / carrying the appliance to avoid touching the bottom of the condenser metal wires at the back of the appliance as you might injure your fingers and hands.

Do not attempt to sit or stand on top of your appliance as it is not designed for such use. You could injure yourself or damage the appliance.

“IMPORTANT: Make sure that mains cable is not caught under the appliance during and after carrying

/moving the appliance, to avoid the mains cable becoming cut or damaged.”

“IMPORTANT: This appliance is not designed for stacking with any other appliance.When positioning your appliance, take care not to damage your flooring, pipes,wall coverings etc.

Do not allow children to play with the appliance or tamper with the controls. BEKO declines to accept any liability should the instructions not be followed.

IMPORTANT

INSTALLATION

INSTRUCTIONS

1.The space in the room where the appliance is installed must not be smaller than 10 cubic metres.

2.This appliance has been designed to operate in ambient temperatures up to 32 degrees C (90 degrees F) and is equipped with ‘Freezer Guard’ which ensures that at the advised setting [4

- four on the control] the frozen food in the freezer will not defrost even if the ambient temperature falls as low as

7

EN

Image 8
Contents COOL54FW COOL54FS Frost Free Combi Fridge / FreezerPlease read this manual first Temperature Control Suggested ArrangementYour refrigerator Page Fuse Electrical RequirementsIMPORTANT! Fitting a Different Plug Energy Saving Tips Transportation Instructions InstallationInstallation Instructions Page Replacing the Interior Light Bulb Reversing the Doors Page Reversing the doors Before operating Final CheckUsing your refrigerator Temperature Control and AdjustmentFRIDGE/FREEZER SuggestedArrangement of Food Storing Frozen Food Freezing Fresh FoodFreezer Compartment Making ICE CubesDefrosting Maintenance and cleaning Dos and Donts Problem Solving Guarantee Details Guarantee DetailsHow To Obtain Service HOW to Obtain ServicePart no 57 1888

COOL54FS, COOL54FW specifications

The Beko COOL54FW and COOL54FS are modern and efficient refrigerator models designed to meet the storage needs of today's households. Known for their sleek designs and user-friendly features, both models bring convenience and performance to the kitchen.

One of the standout features of the Beko COOL54FW and COOL54FS is their impressive energy efficiency. Both models are designed with a focus on reducing energy consumption while maintaining optimal cooling performance. This not only helps the environment but also translates into lower energy bills for the user. The A+ energy rating of these refrigerators ensures efficient operation, making them a great choice for eco-conscious consumers.

In terms of capacity, the COOL54FW and COOL54FS are spacious, offering ample room for groceries, beverages, and other essentials. With multiple shelves and compartments, users can easily organize their food items, making it simpler to access what they need. The adjustable shelves provide flexibility to accommodate larger items, while the dedicated crisper drawers help keep fruits and vegetables fresh for longer.

Both models feature an internal LED lighting system that illuminates the interior, making it easy to locate items, even in low light conditions. The modern design also includes a reversible door, allowing users to choose the configuration that best fits their kitchen layout.

The cooling technology used in these refrigerators ensures consistent and effective temperature distribution. With frost-free operation, owners will never have to deal with the hassle of manually defrosting the appliance, as the automatic defrost feature prevents ice buildup.

Safety and convenience are further enhanced with features such as door alarms that notify users when the door has been left open for too long, reducing the risk of spoilage due to temperature fluctuations. Additionally, the quiet operation of these refrigerators ensures that they won't disrupt the ambiance of your kitchen space.

In summary, the Beko COOL54FW and COOL54FS offer a blend of energy efficiency, spacious storage, user-friendly features, and modern design. Whether you are upgrading your old refrigerator or setting up a new kitchen, these models provide reliable cooling performance and convenience that meets the demands of contemporary living.