Carrier 23 XL installation instructions Size, Options English

Page 5

→

The compressor is heavy. To avoid bodily injury, lift the compressor only by using cables or slings. Do not lift the compressor using threaded eyebolts. Metric threaded eyebolts are provided only for lifting individual com- pressor castings.

IMPORTANT: Only a quali®ed service technician should disassemble and reassemble the machine. After reassembly, the machine must be dehydrated and leak tested.

RIG MACHINE COMPONENTS Ð Refer to instructions below, Fig. 8-12, and Carrier certi®ed prints for machine disassembly.

Do not attempt to cut refrigeration lines or disconnect ¯anges or ®ttings while machine is under pressure. Cut- ting lines or disconnecting ¯anges or ®ttings can result in personal injury or damage to the unit. Be sure both refrigerant and oil charge are removed from the ma- chine before separating the components.

NOTE: If the cooler and condenser vessels must be sepa- rated, the heat exchanger separation feet must be unbolted, rotated, and rebolted in order to keep each heat exchanger level. See Fig. 4, 5, and 8-12.

NOTE: Sensor wiring must be disconnected. Label each wire before removal (see Carrier certi®ed prints). Remove all trans- ducer and thermistor wires at the sensor. Clip all wire ties necessary to remove the wires from the heat ex- changers. Remove the control wiring and oil heater wiring (Frame 1 and 2 machines) at the power panel and the main motor leads at the starter lugs before disconnecting the starter from the machine.

*Carrier recommends that ``I'' Beam Spreader Bars be ®eld supplied and installed.

NOTES:

1.Each chain must be capable of supporting the entire weight of the machine. Maxi- mum weight of machine is 13,200 lbs (5940 Kg).

2.Chain lengths shown are typical for 15 ft (4572 mm) lifting height. Some minor

adjustment may be required.

Suggested ``I'' Beam Spreader Bar*

 

HEAT

CENTER OF GRAVITY Ð

MAXIMUM

APPROXIMATE DIMENSIONS

EXCHANGER

 

 

 

 

WEIGHT

A (Length)

B (Width)

SIZE

 

 

 

ft-in.

mm

ft-in.

mm

lb

Kg

10 or 11

3- 8

1117

1-11

572

11,810

5357

20 or 21

3-10

1161

2- 0

600

13,200

5940

OPTIONS

ENGLISH

SI

in. x lb/ft

cm x N/m

 

1

S12 x 31.8

S30 x 464

2

S10 x 35

S25.4 x 511

3

W12 x 22

W30 x 321

4

W10 x 25

W25.4 x 365

Fig. 4 Ð Machine Rigging Guide (Frame 1 and 2 Machines)

5

796

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Installation Instructions Contents Typical 23XL Installation Frame 1 and 2 Machines Typical 23XL Installation Frame 4 Machine Options English SizeMachine Rigging Guide Frame 4 Machines Width Height Size Heat Exchanger Length Overall Nozzle Pipe SizeWidth Height Heat Exchanger Length OverallUnit Compressor Size AssemblyComponent Frame 1 CompressorHeat Waterbox Heat Exchanger Waterbox PSI Frame DescriptionExchanger Description CoolerPage 23XL Drive End View Frame 1 and 2 Machines 23XL Top View Frame 1 and 2 Machines 23XL Top View Frame 4 Machines Motor Cooling Drain Section Frame 4 Machines Install Machine Supports Standard Isolation Connect Piping Typical Nozzle Piping Nominal Pipe Actual Pipe Frame Nozzle Arrangement CodesNominal Pipe Actual Pipe Frame Pass Piping Flow Data FrameTank Size Weight ASHRAE/ANSI SizeTrade QTY Location Size AnsiPage Page Pumpout Unit Page Page Page Manufacturer Cable no Carrier Comfort Network Communication Bus WiringInstall Field Insulation Typical COMM1 CCN Communication Wiring for Multiple Chillers 23XL Insulation Area for Frame 1 and 2 Machines General Copyright 1994 Carrier Corporation Installation START-UP Request Checklist Testing YES/NO Date to be Completed

23 XL specifications

The Carrier 23 XL series is an advanced line of air conditioning units designed for optimal cooling performance and energy efficiency. This unit stands out in the HVAC industry due to its integration of cutting-edge technologies and user-friendly features.

One of the main features of the Carrier 23 XL is its use of the Greenspeed Intelligence technology. This innovative system allows the unit to modulate its cooling output based on the actual needs of the environment, resulting in significant energy savings. By adjusting the compressor speed, the 23 XL can maintain a consistent temperature without the energy spikes common in traditional air conditioning systems.

Another notable characteristic of the Carrier 23 XL is its high SEER rating, which stands for Seasonal Energy Efficiency Ratio. The 23 XL boasts a SEER rating of up to 24, making it one of the most efficient units available on the market. This efficiency translates to lower utility bills and a reduced carbon footprint, which is a crucial consideration in today’s sustainability-focused world.

The Carrier 23 XL is also equipped with a variable-speed compressor, which enhances its overall performance. This component allows for quieter operation, providing comfortable indoor conditions without noise disturbances. Homeowners can enjoy peace and quiet while the system operates seamlessly in the background.

Moreover, the Carrier 23 XL features advanced air filtration capabilities. The unit is designed with high-efficiency filters that capture dust, pollen, and other airborne particles, improving indoor air quality. This feature is particularly beneficial for individuals with allergies or respiratory conditions, as it ensures a healthier living environment.

The sleek and compact design of the Carrier 23 XL makes it suitable for various installation configurations, maintaining aesthetic appeal without sacrificing performance. Additionally, it offers a range of smart features, such as compatibility with Wi-Fi-enabled thermostats, allowing users to control their home environment remotely via smartphone applications.

Finally, Carrier’s commitment to quality and reliability is evident in the 23 XL model. With robust construction and a warranty that provides peace of mind, homeowners can trust that their investment will deliver comfort and efficiency for years to come. Overall, the Carrier 23 XL is an exceptional choice for those seeking a blend of advanced technology, energy efficiency, and superior indoor comfort.
Top Page Image Contents