Single-Line Features
Account Code Entry
For bookkeeping purposes, your System Administrator may assign account codes to use with certain calls. If you are required to use account codes for outgoing calls, the account code must be entered before you can place an outgoing call. If this feature is not mandatory, you may still use the Account Code Entry feature.
See your System Administrator to verify the types of calls, if any, for which you must enter an account code.
Account Code Entry - Outgoing Calls
1 Listen for dial tone, then press ❑* ❑0 .
2 Dial the account code.
NOTE: If you make a mistake while entering the account
code, press ❑* ❑0 again, then the correct account code.“
3 Listen for dial tone.
4Dial the outside line access code and listen for dial tone again.
5Dial the telephone number.
(Continued)
5