Sennheiser SKP 500 manual Working with the operating menu, Getting into the operating menu

Page 15

Working with the operating menu

By way of example of the “TUNE” menu, this section describes how to use the operating menu.

After switching the transmitter on, the standard display is shown on the display panel.

Getting into the operating menu

Press the SET button to get from the standard display into the operating menu. The last selected menu flashes on the display.

Selecting a menu

Press the / buttons to select a menu.

Press the SET button to get into the setting mode of the selected menu. The current setting that can be adjusted flashes on the display.

Adjusting a setting

Press the / buttons to adjust the setting.

By briefly pressing the / buttons, the display jumps either forwards or backwards to the next setting. In the “CHAN”, “TUNE” and “NAME” menu, the / buttons feature a “fast search” function. If you hold down a button, the display cycles continuously, allowing you to get fast and easily to your desired setting.

15

Image 15

Contents Instructions for use Thank you for choosing Sennheiser Contents Channel bank system SKP 500 G2 plug-on transmitterDelivery includes Safety instructionsAreas of application Operating controls Operation and battery status indication Indications and displaysLC display panel Display backlighting Mute displayModulation display Pilot displayInserting and replacing the batteries Preparing the plug-on transmitter for usePlugging the plug-on transmitter onto a microphone Using the plug-on transmitter Switching the plug-on transmitter on/offMuting the plug-on transmitter Activating/deactivating the lock mode Operating menu ButtonsOverview of menus Selecting a menu Adjusting a settingWorking with the operating menu Getting into the operating menuExiting the operating menu Storing a settingExit Operating menu of the plug-on transmitterDisply Multi-channel operation Adjustment tips for the operating menuSwitching between channel banks Bank Switching between the channels in a channel bank ChanAdjusting the sensitivity Sensit Switching the phantom powering on/off Phanto Selecting the standard display DislpyEntering a name Name Activating/deactivating the pilot tone transmission Pilot Loading the factory-preset default settings ResetExiting the operating menu Exit Activating/deactivating the lock mode LockError checklist TroubleshootingFor optimum reception Care and maintenanceRecommendations and tips For the plug-on transmitterSpecifications Plug-on pouch AccessoriesAccupack 2015 Charger for BA 2015 accupackBatteries or rechargeable batteries Warranty regulationsManufacturer declarations CE Declaration Conformity