Sennheiser SKP 500 manual Indications and displays, LC display panel

Page 8

Indications and displays

LC display panel

Alphanumeric display

“B.CH“ – appears when the channel bank and the channel number are displayed

“MHz“ – appears when the frequency is displayed

4-step battery status display

Lock mode icon

(lock mode is activated)

“PILOT” display

(pilot tone transmission is activated)

“MUTE” display (audio input is muted)

7-step level display for audio signal “AF”

Operation and battery status indication

The red LED (LOW BAT/ON) provides information on the current operating state of the plug-on transmitter:

Red LED lit up:	The plug-on transmitter is switched
	on and the capacity of the batteries/
	BA 2015 accupack is sufficient.
Red LED flashing:	The batteries are/the	BA 2015
	accupack is going flat (LOW BAT)!
In addition, the 4-step battery status display		on the

display panel provides information on the remaining battery/BA 2015 accupack capacity:

3 segments:	capacity approx. 100 %
2 segments:	capacity approx. 70 %
1 segment:	capacity approx. 30 %

Battery icon flashing: LOW BAT

8

Image 8

Contents Instructions for use Thank you for choosing Sennheiser Contents SKP 500 G2 plug-on transmitter Channel bank systemSafety instructions Delivery includesAreas of application Operating controls LC display panel Operation and battery status indicationIndications and displays Mute display Modulation displayPilot display Display backlightingPreparing the plug-on transmitter for use Inserting and replacing the batteriesPlugging the plug-on transmitter onto a microphone Muting the plug-on transmitter Using the plug-on transmitterSwitching the plug-on transmitter on/off Activating/deactivating the lock mode Overview of menus Operating menuButtons Adjusting a setting Working with the operating menuGetting into the operating menu Selecting a menuStoring a setting Exiting the operating menuOperating menu of the plug-on transmitter ExitDisply Adjustment tips for the operating menu Switching between channel banks BankSwitching between the channels in a channel bank Chan Multi-channel operationAdjusting the sensitivity Sensit Entering a name Name Switching the phantom powering on/off PhantoSelecting the standard display Dislpy Loading the factory-preset default settings Reset Activating/deactivating the pilot tone transmission PilotActivating/deactivating the lock mode Lock Exiting the operating menu ExitTroubleshooting Error checklistCare and maintenance Recommendations and tipsFor the plug-on transmitter For optimum receptionSpecifications Accessories Accupack2015 Charger for BA 2015 accupack Plug-on pouchWarranty regulations Manufacturer declarationsCE Declaration Conformity Batteries or rechargeable batteries