Sennheiser manual SKP 500 G2 plug-on transmitter, Channel bank system

Page 4

The SKP 500 G2 plug-on transmitter

The SKP 500 G2 plug-on transmitter is part of the evolution wireless series ew 500 G2. With this series, Sennheiser offers high-quality state-of-the-art RF transmission systems with a high level of operational reliability and ease of use. Transmitters andreceiverspermit wireless transmissionwith studio-quality sound. The excellent transmission reliability

of the ew 500 G2 series is based on the use of

y further optimized PLL synthesizer and microprocessor technology,

ythe HDX noise reduction system,

yand the pilot tone squelch control.

The channel bank system

The plug-on transmitter is available in five UHF frequency ranges with 1440 transmission frequencies per frequency range. Please note: Frequency usage is different for each country. Your Sennheiser agent will have all the necessary details on the available legal frequencies for your area.

Range A: 518 to 554 MHz

Range B: 626 to 662 MHz

Range C: 740 to 776 MHz

Range D: 786 to 822 MHz

Range E: 830 to 866 MHz

The plug-on transmitter has nine channel banks with up to 20 switchable channels each.

channel bank 1...8

channel bank U

channel 1

 

preset frequency

 

 

 

 

 

 

 

channel 2

 

preset frequency

 

 

 

 

channel 20

 

preset frequency

 

 

 

 

channel 1

 

freely selectable frequency

 

 

 

 

 

 

 

channel 2

 

freely selectable frequency

 

 

 

 

 

 

 

channel 20

 

freely selectable frequency

 

Each of the channels in the channel banks “1” to “8” has been factory-preset to a transmission frequency (see enclosed frequency table). These transmission frequencies cannot be changed but have been preset so that e.g. country-specific regulations on frequency usage are taken into account.

The channel bank “U” (user bank) allows you to store your selection out of 1440 transmission frequencies that are freely selectable within the preset frequency range.

4

Image 4
Contents Instructions for use Thank you for choosing Sennheiser Contents SKP 500 G2 plug-on transmitter Channel bank systemSafety instructions Delivery includesAreas of application Operating controls Indications and displays Operation and battery status indicationLC display panel Mute display Modulation displayPilot display Display backlightingPreparing the plug-on transmitter for use Inserting and replacing the batteriesPlugging the plug-on transmitter onto a microphone Switching the plug-on transmitter on/off Using the plug-on transmitterMuting the plug-on transmitter Activating/deactivating the lock mode Buttons Operating menuOverview of menus Adjusting a setting Working with the operating menuGetting into the operating menu Selecting a menuStoring a setting Exiting the operating menuOperating menu of the plug-on transmitter ExitDisply Adjustment tips for the operating menu Switching between channel banks BankSwitching between the channels in a channel bank Chan Multi-channel operationAdjusting the sensitivity Sensit Selecting the standard display Dislpy Switching the phantom powering on/off PhantoEntering a name Name Loading the factory-preset default settings Reset Activating/deactivating the pilot tone transmission PilotActivating/deactivating the lock mode Lock Exiting the operating menu ExitTroubleshooting Error checklistCare and maintenance Recommendations and tipsFor the plug-on transmitter For optimum receptionSpecifications Accessories Accupack2015 Charger for BA 2015 accupack Plug-on pouchWarranty regulations Manufacturer declarationsCE Declaration Conformity Batteries or rechargeable batteries